##
## freshclam - automatically generated by clamconf 0.97.2
##


# Save all reports to a log file.
# Default: disabled
LogFile /var/clamav/freshclam.log

# Maximum size of the log file. Value of 0 disables the limit.
# NOTE: If the application starts and the maximum size has already been reach,
#       logging gets disabled.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
# Default: 0
LogFileMaxSize 0

# Log time with each message.
# Default: yes
LogTime yes

# Use the system logger (can work together with LogFile).
# Default: disabled
#LogSyslog yes

# Type of syslog messages. Please refer to 'man syslog' for the facility names.
# Default: LOG_LOCAL5
#LogFacility 

# Enable verbose logging.
# Default: disabled
#LogVerbose yes

# Save the process ID to a file.
# Default: disabled
#PidFile /var/clamav/freshclam.pid

# This option allows you to change the default database directory.
# If you enable it, please make sure it points to the same directory in
# both clamd and freshclam.
# Default: /var/clamav
DatabaseDirectory /var/clamav

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: disabled
#Debug yes

# This option defined how many times daily freshclam should check for
# a database update.
# Default: 12
Checks 48

# Use DNS to verify the virus database version. Freshclam uses DNS TXT records
# to verify the versions of the database and software itself. With this
# directive you can change the database verification domain.
# WARNING: Please don't change it unless you're configuring freshclam to use
#          your own database verification domain.
# Default: current.cvd.clamav.net
DNSDatabaseInfo current.cvd.clamav.net

# DatabaseMirror specifies to which mirror(s) freshclam should connect. You
# should have at least two entries: db.XY.clamav.net (or db.XY.ipv6.clamav.net
# for IPv6) and database.clamav.net (in this order). Please replace XY with
# your country code (see http://www.iana.org/cctld/cctld-whois.htm).
# database.clamav.net is a round-robin record which points to our most reliable
# mirrors. It's used as a fall back in case db.XY.clamav.net is not working.
# Default: disabled
#DatabaseMirror db.XY.clamav.net
DatabaseMirror database.clamav.net

# This option defines how many attempts freshclam should make before giving up.
# Default: 3
#MaxAttempts 5

# With this option you can control scripted updates. It's highly recommended to
# keep them enabled.
# Default: yes
#ScriptedUpdates no

# With this option enabled, freshclam will attempt to load new
# databases into memory to make sure they are properly handled
# by libclamav before replacing the old ones.
# Default: yes
#TestDatabases no

# By default freshclam will keep the local databases (.cld) uncompressed to
# make their handling faster. With this option you can enable the compression.
# The change will take effect with the next database update.
# Default: no
#CompressLocalDatabase yes

# Download an additional 3rd party signature database distributed through
# the ClamAV mirrors. This option can be used multiple times. Here you can
# find a list of available databases:
# http://www.clamav.net/download/cvd/3rdparty
# Default: disabled
#ExtraDatabase dbname1
#ExtraDatabase dbname2

# With this option you can provide custom sources (http:// or file://) for
# database files. This option can be used multiple times.
# Default: disabled
#DatabaseCustomURL http://myserver.com/mysigs.ndb
#DatabaseCustomURL file:///mnt/nfs/local.hdb

# If you're behind a proxy, please enter its address here.
# Default: disabled
#HTTPProxyServer your-proxy

# HTTP proxy's port
# Default: disabled
#HTTPProxyPort 8080

# A user name for the HTTP proxy authentication.
# Default: disabled
#HTTPProxyUsername username

# A password for the HTTP proxy authentication.
# Default: disabled
#HTTPProxyPassword pass

# If your servers are behind a firewall/proxy which does a User-Agent
# filtering you can use this option to force the use of a different
# User-Agent header.
# Default: disabled
#HTTPUserAgent default

# Send the RELOAD command to clamd after a successful update.
# Default: /etc/clamav/clamd.conf
#NotifyClamd yes

# Run a command after a successful database update.
# Default: disabled
#OnUpdateExecute command

# Run a command when a database update error occurs.
# Default: disabled
#OnErrorExecute command

# Run a command when freshclam reports an outdated version.
# In the command string %v will be replaced with the new version number.
# Default: disabled
#OnOutdatedExecute command

# With this option you can provide a client address for the database downlading.
# Useful for multi-homed systems.
# Default: disabled
#LocalIPAddress aaa.bbb.ccc.ddd

# Timeout in seconds when connecting to database server.
# Default: 30
#ConnectTimeout 30

# Timeout in seconds when reading from database server.
# Default: 30
#ReceiveTimeout 30

# When enabled freshclam will submit statistics to the ClamAV Project about
# the latest virus detections in your environment. The ClamAV maintainers
# will then use this data to determine what types of malware are the most
# detected in the field and in what geographic area they are.
# Freshclam will connect to clamd in order to get recent statistics.
# Default: disabled
#SubmitDetectionStats /etc/clamav/clamd.conf

# Country of origin of malware/detection statistics (for statistical
# purposes only). The statistics collector at ClamAV.net will look up
# your IP address to determine the geographical origin of the malware
# reported by your installation. If this installation is mainly used to
# scan data which comes from a different location, please enable this
# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
# of the country of origin.
# Default: disabled
#DetectionStatsCountry country-code

# This option enables support for our "Personal Statistics" service.
# When this option is enabled, the information on malware detected by
# your clamd installation is made available to you through our website.
# To get your HostID, log on http://www.stats.clamav.net and add a new
# host to your host list. Once you have the HostID, uncomment this option
# and paste the HostID here. As soon as your freshclam starts submitting
# information to our stats collecting service, you will be able to view
# the statistics of this clamd installation by logging into
# http://www.stats.clamav.net with the same credentials you used to
# generate the HostID. For more information refer to:
# http://www.clamav.net/support/faq/faq-cctts/
# This feature requires SubmitDetectionStats to be enabled.
# Default: disabled
#DetectionStatsHostID unique-id

# This option enables support for Google Safe Browsing. When activated for
# the first time, freshclam will download a new database file (safebrowsing.cvd)
# which will be automatically loaded by clamd and clamscan during the next
# reload, provided that the heuristic phishing detection is turned on. This
# database includes information about websites that may be phishing sites or
# possible sources of malware. When using this option, it's mandatory to run
# freshclam at least every 30 minutes.
# Freshclam uses the ClamAV's mirror infrastructure to distribute the
# database and its updates but all the contents are provided under Google's
# terms of use. See http://code.google.com/support/bin/answer.py?answer=70015
# and http://safebrowsing.clamav.net for more information.
# Default: yes
SafeBrowsing yes

# This option enables downloading of bytecode.cvd, which includes additional
# detection mechanisms and improvements to the ClamAV engine.
# Default: yes
#Bytecode no