NetCDF: Network Common Data Form

This format is supported for read and write access. NetCDF is an interface for array-oriented data access and is used for representing scientific data.

The fill value metadata or missing_value backward compatibililty is preserved as NODATA value when available.

NOTE: Implemented as gdal/frmts/netcdf/netcdfdataset.cpp.

Multiple Image Handling (Subdatasets)

Nework Command Data Form is a container for several different arrays most used for storing scientific dataset. One netCDF file may contain several datasets. They may differ in size, number of dimensions and may represent data for different regions.

If the file contains only one netCDF array which appears to be an image, it may be accessed directly, but if the file contains multiple images it may be necessary to import the file via a two step process.

The first step is to get a report of the components images (dataset) in the file using gdalinfo, and then to import the desired images using gdal_translate. The gdalinfo utility lists all multidimensional subdatasets from the input netCDF file.

The name of individual images are assigned to the SUBDATASET_n_NAME metadata item. The description for each image is found in the SUBDATASET_n_DESC metadata item. For netCDF images will follow this format: NETCDF:filename:variable_name

where filename is the name of the input file, and variable_name is the dataset selected withing the file.

On the second step you provide this name for gdalinfo to get information about the dataset or gdal_translate to read dataset.

For example, we want to read data from a netCDF file:

$ gdalinfo sst.nc
Driver: netCDF/Network Common Data Format
Size is 512, 512
Coordinate System is `'
Metadata:
  NC_GLOBAL#title=IPSL  model output prepared for IPCC Fourth Assessment SRES A2 experiment
  NC_GLOBAL#institution=IPSL (Institut Pierre Simon Laplace, Paris, France)
  NC_GLOBAL#source=IPSL-CM4_v1 (2003) : atmosphere : LMDZ (IPSL-CM4_IPCC, 96x71x19) ; ocean ORCA2 (ipsl_cm4_v1_8, 2x2L31); sea ice LIM (ipsl_cm4_v
  NC_GLOBAL#contact=Sebastien Denvil, sebastien.denvil@ipsl.jussieu.fr
  NC_GLOBAL#project_id=IPCC Fourth Assessment
  NC_GLOBAL#table_id=Table O1 (13 November 2004)
  NC_GLOBAL#experiment_id=SRES A2 experiment
  NC_GLOBAL#realization=1
  NC_GLOBAL#cmor_version=9.600000e-01
  NC_GLOBAL#Conventions=CF-1.0
  NC_GLOBAL#history=YYYY/MM/JJ: data generated; YYYY/MM/JJ+1 data transformed  At 16:37:23 on 01/11/2005, CMOR rewrote data to comply with CF standards and IPCC Fourth Assessment requirements
  NC_GLOBAL#references=Dufresne et al, Journal of Climate, 2015, vol XX, p 136
  NC_GLOBAL#comment=Test drive
Subdatasets:
  SUBDATASET_1_NAME=NETCDF:"sst.nc":lon_bnds
  SUBDATASET_1_DESC=[180x2] lon_bnds (64-bit floating-point)
  SUBDATASET_2_NAME=NETCDF:"sst.nc":lat_bnds
  SUBDATASET_2_DESC=[170x2] lat_bnds (64-bit floating-point)
  SUBDATASET_3_NAME=NETCDF:"sst.nc":time_bnds
  SUBDATASET_3_DESC=[24x2] time_bnds (64-bit floating-point)
  SUBDATASET_4_NAME=NETCDF:"sst.nc":tos
  SUBDATASET_4_DESC=[24x170x180] sea_surface_temperature (32-bit floating-point)Corner Coordinates:
Upper Left  (    0.0,    0.0)
Lower Left  (    0.0,  512.0)
Upper Right (  512.0,    0.0)
Lower Right (  512.0,  512.0)
Center      (  256.0,  256.0)

This netCDF files contain 4 datasets, lon_bnds, lat_bnds, tim_bnds and tos. Now select the subdataset, described as: NETCDF:"sst.nc":tos

[24x17x180] sea_surface_temperature (32-bit floating-point)

and get the information about the number of bands there is inside this variable.

$ gdalinfo NETCDF:"sst.nc":tos
Driver: netCDF/Network Common Data Format
Size is 180, 170
Coordinate System is `'
Origin = (1.000000,-79.500000)
Pixel Size = (1.98888889,0.99411765)
Metadata:
  NC_GLOBAL#title=IPSL  model output prepared for IPCC Fourth Assessment SRES A2 experiment
  NC_GLOBAL#institution=IPSL (Institut Pierre Simon Laplace, Paris, France)

.... More metadata

  time#standard_name=time
  time#long_name=time
  time#units=days since 2001-1-1
  time#axis=T
  time#calendar=360_day
  time#bounds=time_bnds
  time#original_units=seconds since 2001-1-1
Corner Coordinates:
Upper Left  (   1.0000000, -79.5000000)
Lower Left  (   1.0000000,  89.5000000)
Upper Right (     359.000,     -79.500)
Lower Right (     359.000,      89.500)
Center      ( 180.0000000,   5.0000000)
Band 1 Block=180x1 Type=Float32, ColorInterp=Undefined
  NoData Value=1e+20
  Metadata:
    NETCDF_VARNAME=tos
    NETCDF_DIMENSION_time=15
    NETCDF_time_units=days since 2001-1-1
Band 2 Block=180x1 Type=Float32, ColorInterp=Undefined
  NoData Value=1e+20
  Metadata:
    NETCDF_VARNAME=tos
    NETCDF_DIMENSION_time=45
    NETCDF_time_units=days since 2001-1-1

.... More Bands

Band 22 Block=180x1 Type=Float32, ColorInterp=Undefined
  NoData Value=1e+20
  Metadata:
    NETCDF_VARNAME=tos
    NETCDF_DIMENSION_time=645
    NETCDF_time_units=days since 2001-1-1
Band 23 Block=180x1 Type=Float32, ColorInterp=Undefined
  NoData Value=1e+20
  Metadata:
    NETCDF_VARNAME=tos
    NETCDF_DIMENSION_time=675
    NETCDF_time_units=days since 2001-1-1
Band 24 Block=180x1 Type=Float32, ColorInterp=Undefined
  NoData Value=1e+20
  Metadata:
    NETCDF_VARNAME=tos
    NETCDF_DIMENSION_time=705
    NETCDF_time_units=days since 2001-1-1

gdalinfo display the number of bands into this subdataset. There are metadata attached to each band. In this example, the metadata informs us that each band correspond to an array of monthly sea surface temperature from January 2001. There are 24 months of data in this subdataset. You may also use gdal_translate for reading the subdataset.

Note that you should provide exactly the contents of the line marked SUBDATASET_n_NAME to GDAL, including the NETCDF: prefix.

The NETCDF prefix must be first. It triggers the subdataset netCDF driver. This driver is intended only for importing remote sensing and geospatial datasets in form of raster images. If you want explore all data contained in netCDF file you should use another tools.

Dimension

The netCDF driver assume that data follows the CF-1 convention from UNIDATA The dimensions inside the NetCDF file use the following rules: (Z,Y,X). If there are more than 3 dimensions, the driver will merge them into bands. For example if you have an 4 dimension arrays of the type (P, T, Y, X). The driver will multiply the last 2 dimensions (P*T). The driver will display the bands in the following order. It will first increment T and then P. Metadata will be displayed on each band with its corresponding T and P values.

Georeference

There is no universal way of storing georeferencing in netCDF files. The driver first tries to follow the CF-1 Convention from UNIDATA looking for the Metadata named "grid_mapping". If "grid_mapping" is not present, the driver will try to find an lat/lon grid array to set geotransform array. The NetCDF driver verifies that the Lat/Lon array is equally space.

If those 2 mehtods fail, NetCDF driver will try to read the following metadata directly and set up georefenrencing.

spatial_ref (Well Known Text)

GeoTransform (GeoTransform array)

or,

Northernmost_Northing
Southernmost_Northing
Easternmost_Easting
Westernmost_Easting

Creation Issues

This driver supports creation of netCDF file following the CF-1 convention. You may create set of 2D datasets. Each variable array is named Band1, Band2, ... BandN.

Each band will have metadata tied to it giving a short description of the data it contains.

GDAL NetCDF Metadata

All netCDF attributes are transparently translated as GDAL metadata.

The translation follow these directives:

Global NetCDF metatadata have a NC_GLOBAL tag prefixed.
Dataset metadata have their variable name prefixed.
Each prefix is followed by a # sign.
The NetCDF attribute follows the form: name=value.

Example:

$ gdalinfo NETCDF:"sst.nc":tos
Driver: netCDF/Network Common Data Format
Size is 180, 170
Coordinate System is `'
Origin = (1.000000,-79.500000)
Pixel Size = (1.98888889,0.99411765)
Metadata:

NetCDF global attributes

  NC_GLOBAL#title=IPSL  model output prepared for IPCC Fourth Assessment SRES A2 experiment

Variables attributes for: tos, lon, lat and time

  tos#standard_name=sea_surface_temperature
  tos#long_name=Sea Surface Temperature
  tos#units=K
  tos#cell_methods=time: mean (interval: 30 minutes)
  tos#_FillValue=1.000000e+20
  tos#missing_value=1.000000e+20
  tos#original_name=sosstsst
  tos#original_units=degC
  tos#history= At   16:37:23 on 01/11/2005: CMOR altered the data in the following ways: added 2.73150E+02 to yield output units;  Cyclical dimension was output starting at a different lon;
  lon#standard_name=longitude
  lon#long_name=longitude
  lon#units=degrees_east
  lon#axis=X
  lon#bounds=lon_bnds
  lon#original_units=degrees_east
  lat#standard_name=latitude
  lat#long_name=latitude
  lat#units=degrees_north
  lat#axis=Y
  lat#bounds=lat_bnds
  lat#original_units=degrees_north
  time#standard_name=time
  time#long_name=time
  time#units=days since 2001-1-1
  time#axis=T
  time#calendar=360_day
  time#bounds=time_bnds
  time#original_units=seconds since 2001-1-1

Driver building

This driver is compiled with the UNIDATA netCDF library.

You need to download or compile the netCDF library before configuring GDAL with netCDF support.

Please note that with CygWIN you need to be sure that the DLLs are executable, or GDAL will not execute.

chmod a+rx [NetCDF DLLs]

The netCDF DLLs directory must be to be in your PATH.