######################## rpl_ddl.test ########################
#                                                            #
# DDL statements (sometimes with implicit COMMIT) executed   #
# by the master and it's propagation into the slave          #
#                                                            #
##############################################################

#
# NOTE, PLEASE BE CAREFUL, WHEN MODIFYING THE TESTS !!
#
#      1. !All! objects to be dropped, renamed, altered ... must be created
#         in AUTOCOMMIT= 1 mode before AUTOCOMMIT is set to 0 and the test
#         sequences start.
#
#      2. Never use a test object, which was direct or indirect affected by a
#         preceeding test sequence again.
#         Except table d1.t1 where ONLY DML is allowed.
#
#         If one preceeding test sequence hits a (sometimes not good visible,
#         because the sql error code of the statement might be 0) bug
#         and these rules are ignored, a following test sequence might earn ugly
#         effects like failing 'sync_slave_with_master', crashes of the slave or
#         abort of the test case etc..
#
#      3. The assignment of the DDL command to be tested to $my_stmt can
#         be a bit difficult. "'" must be avoided, because the test
#         routine "include/rpl_stmt_seq.inc" performs a
#         eval SELECT CONCAT('######## ','$my_stmt','  ########') as "";
#

--source include/have_innodb.inc
--source include/master-slave.inc

###############################################################
# Some preparations
###############################################################
# The sync_slave_with_master is needed to make the xids deterministic.
sync_slave_with_master;
connection master;

SET AUTOCOMMIT = 1;
#
# 1. DROP all objects, which probably already exist, but must be created here
#
--disable_warnings
DROP DATABASE IF EXISTS mysqltest1;
DROP DATABASE IF EXISTS mysqltest2;
DROP DATABASE IF EXISTS mysqltest3;
--enable_warnings
#
# 2. CREATE all objects needed
#    working database is mysqltest1
#    working (transactional!) is mysqltest1.t1 
#
CREATE DATABASE mysqltest1;
CREATE DATABASE mysqltest2;
CREATE TABLE mysqltest1.t1 (f1 BIGINT) ENGINE= "InnoDB";
INSERT INTO mysqltest1.t1 SET f1= 0;
CREATE TABLE mysqltest1.t2 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t3 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t4 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t5 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t6 (f1 BIGINT) ENGINE= "InnoDB";
CREATE INDEX my_idx6 ON mysqltest1.t6(f1);
CREATE TABLE mysqltest1.t7 (f1 BIGINT) ENGINE= "InnoDB";
INSERT INTO mysqltest1.t7 SET f1= 0;
CREATE TABLE mysqltest1.t8 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t9 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t10 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t11 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t12 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t13 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t14 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t15 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t16 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t17 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t18 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TABLE mysqltest1.t19 (f1 BIGINT) ENGINE= "InnoDB";
CREATE TEMPORARY TABLE mysqltest1.t23 (f1 BIGINT);

#
# 3. master sessions: never do AUTOCOMMIT
#    slave  sessions: never do AUTOCOMMIT
#
SET AUTOCOMMIT = 0;
use mysqltest1;
sync_slave_with_master;
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SET AUTOCOMMIT = 0;
use mysqltest1;
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log


# We don't want to abort the whole test if one statement sent
# to the server gets an error, because the following test
# sequences are nearly independend of the previous statements. 
--disable_abort_on_error

###############################################################
# Banal case: (explicit) COMMIT and ROLLBACK
# Just for checking if the test sequence is usable
###############################################################

let $my_stmt= COMMIT;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc

let $my_stmt= ROLLBACK;
let $my_master_commit= false;
let $my_slave_commit= false;
--source include/rpl_stmt_seq.inc

###############################################################
# Cases with commands very similar to COMMIT
###############################################################

let $my_stmt= SET AUTOCOMMIT=1;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SET AUTOCOMMIT=0;

let $my_stmt= START TRANSACTION;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc

let $my_stmt= BEGIN;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc

###############################################################
# Cases with (BASE) TABLES and (UPDATABLE) VIEWs
###############################################################

let $my_stmt= DROP TABLE mysqltest1.t2;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW TABLES LIKE 't2';
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SHOW TABLES LIKE 't2';
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

# Note: Since this test is executed with a skip-innodb slave, the
# slave incorrectly commits the insert.  One can *not* have InnoDB on
# master and MyISAM on slave and expect that a transactional rollback
# after a CREATE TEMPORARY TABLE should work correctly on the slave.
# For this to work properly the handler on the slave must be able to 
# handle transactions (e.g. InnoDB or NDB).
let $my_stmt= DROP TEMPORARY TABLE mysqltest1.t23;
let $my_master_commit= false;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW TABLES LIKE 't23';
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SHOW TABLES LIKE 't23';
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

let $my_stmt= RENAME TABLE mysqltest1.t3 to mysqltest1.t20;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW TABLES LIKE 't20';
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SHOW TABLES LIKE 't20';
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

let $my_stmt= ALTER TABLE mysqltest1.t4 ADD column f2 BIGINT;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
describe mysqltest1.t4;
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
describe mysqltest1.t4;
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

let $my_stmt= CREATE TABLE mysqltest1.t21 (f1 BIGINT) ENGINE= "InnoDB";
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc

# Note: Since this test is executed with a skip-innodb slave, the
# slave incorrectly commits the insert.  One can *not* have InnoDB on
# master and MyISAM on slave and expect that a transactional rollback
# after a CREATE TEMPORARY TABLE should work correctly on the slave.
# For this to work properly the handler on the slave must be able to 
# handle transactions (e.g. InnoDB or NDB).
let $my_stmt= CREATE TEMPORARY TABLE mysqltest1.t22 (f1 BIGINT);
let $my_master_commit= false;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc

let $my_stmt= TRUNCATE TABLE mysqltest1.t7;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SELECT * FROM mysqltest1.t7;
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SELECT * FROM mysqltest1.t7;
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

###############################################################
# Cases with LOCK/UNLOCK
###############################################################

# MySQL insists in locking mysqltest1.t1, because rpl_stmt_seq performs an
# INSERT into this table.
let $my_stmt= LOCK TABLES mysqltest1.t1 WRITE, mysqltest1.t8 READ;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
UNLOCK TABLES;

# No prior locking
let $my_stmt= UNLOCK TABLES;
let $my_master_commit= false;
let $my_slave_commit= false;
--source include/rpl_stmt_seq.inc

# With prior read locking
# Note that this test generate an error since the rpl_stmt_seq.inc
# tries to insert into t1.
LOCK TABLES mysqltest1.t1 READ;
let $my_stmt= UNLOCK TABLES;
let $my_master_commit= false;
let $my_slave_commit= false;
--source include/rpl_stmt_seq.inc

# With prior write locking
LOCK TABLES mysqltest1.t1 WRITE, mysqltest1.t8 READ;
let $my_stmt= UNLOCK TABLES;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc

###############################################################
# Cases with INDEXES
###############################################################

let $my_stmt= DROP INDEX my_idx6 ON mysqltest1.t6;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW INDEX FROM mysqltest1.t6;
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SHOW INDEX FROM mysqltest1.t6;
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

let $my_stmt= CREATE INDEX my_idx5 ON mysqltest1.t5(f1);
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW INDEX FROM mysqltest1.t5;
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SHOW INDEX FROM mysqltest1.t5;
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

###############################################################
# Cases with DATABASE
###############################################################

let $my_stmt= DROP DATABASE mysqltest2;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW DATABASES LIKE "mysqltest2";
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SHOW DATABASES LIKE "mysqltest2";
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

let $my_stmt= CREATE DATABASE mysqltest3;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW DATABASES LIKE "mysqltest3";
connection slave;
--disable_query_log
SELECT '-------- switch to slave --------' as "";
--enable_query_log
SHOW DATABASES LIKE "mysqltest3";
connection master;
--disable_query_log
SELECT '-------- switch to master -------' as "";
--enable_query_log

# End of 4.1 tests

###############################################################
# Cases with stored procedures
###############################################################
let $my_stmt= CREATE PROCEDURE p1() READS SQL DATA SELECT "this is p1";
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
--vertical_results
--replace_column 5 # 6 #
SHOW PROCEDURE STATUS LIKE 'p1';
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
--replace_column 5 # 6 #
SHOW PROCEDURE STATUS LIKE 'p1';
connection master;
--horizontal_results

let $my_stmt= ALTER PROCEDURE p1 COMMENT "I have been altered";
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
--vertical_results
--replace_column 5 # 6 #
SHOW PROCEDURE STATUS LIKE 'p1';
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
--replace_column 5 # 6 #
SHOW PROCEDURE STATUS LIKE 'p1';
connection master;
--horizontal_results

let $my_stmt= DROP PROCEDURE p1;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
--vertical_results
SHOW PROCEDURE STATUS LIKE 'p1';
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SHOW PROCEDURE STATUS LIKE 'p1';
connection master;
--horizontal_results

###############################################################
# Cases with VIEWs
###############################################################
let $my_stmt= CREATE OR REPLACE VIEW v1 as select * from t1;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW CREATE VIEW v1;
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SHOW CREATE VIEW v1;
connection master;

let $my_stmt= ALTER VIEW v1 AS select f1 from t1;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW CREATE VIEW v1;
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SHOW CREATE VIEW v1;
connection master;

let $my_stmt= DROP VIEW IF EXISTS v1;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
--error 1146
SHOW CREATE VIEW v1;
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
--error 1146
SHOW CREATE VIEW v1;
connection master;

###############################################################
# Cases with TRIGGERs
###############################################################
let $my_stmt= CREATE TRIGGER trg1 BEFORE INSERT ON t1 FOR EACH ROW SET @a:=1;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW TRIGGERS;
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SHOW TRIGGERS;
connection master;

let $my_stmt= DROP TRIGGER trg1;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SHOW TRIGGERS;
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SHOW TRIGGERS;
connection master;

###############################################################
# Cases with USERs
###############################################################
let $my_stmt= CREATE USER user1@localhost;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SELECT user FROM mysql.user WHERE user = 'user1';
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SELECT user FROM mysql.user WHERE user = 'user1';
connection master;

let $my_stmt= RENAME USER user1@localhost TO rename1@localhost;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SELECT user FROM mysql.user WHERE user = 'rename1';
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SELECT user FROM mysql.user WHERE user = 'rename1';
connection master;

let $my_stmt= DROP USER rename1@localhost;
let $my_master_commit= true;
let $my_slave_commit= true;
--source include/rpl_stmt_seq.inc
SELECT user FROM mysql.user WHERE user = 'rename1';
--disable_query_log
SELECT '-------- switch to slave -------' as "";
--enable_query_log
connection slave;
SELECT user FROM mysql.user WHERE user = 'rename1';
connection master;

###############################################################
# Cleanup
###############################################################
--disable_warnings
DROP DATABASE IF EXISTS mysqltest1;
DROP DATABASE IF EXISTS mysqltest2;
DROP DATABASE IF EXISTS mysqltest3;
--enable_warnings