#
# NetWorker
# 7.3.2.Build.364
# EMC Corporation
#
# SONY ASC/ASCQ Error Codes
#
0x29, 0x80, Drive failed power or test or diagnostic
0x04, 0x83, Door is opened ("DOOR OPEN" is lit on the DMS display)
0x04, 0x8d, DMS is in the test mode
0xa0, 0x00, Currently resetting SCSI
0xa1, 0x00, Ejecting
0x80, 0x00, Synchronize error has occurred
0x81, 0x00, Lost lock error has occurred
0x83, 0x00, Abnormal data transmission speed
0x84, 0x00, Parity error between Drive has occurred (Faulty connection of data cable)
0x90, 0x00, Insert a tape which is requested to recover data
0x90, 0x01, Recover failed
0x90, 0x02, Insert an unformatted tape
0x90, 0x03, Attempted to load a cassette that was not unloaded properly the last time
0xfc, 0x00, READ/WRITE done in inhibited area
0x28, 0x8d, Test mode is canceled
0x81, 0x1d, Could not search for window
0x81, 0x1f, Barcode read error
0x81, 0x23, Command was interrupted and ended
0x81, 0x28, Servo went off (SERVO OFF2)
0x81, 0x29, Media size error (MEDIUM SIZE ERROR2)
0x81, 0x2f, Communication with CC is abnormal (DMS-B35 only)
0x81, 0x33, Representative window is not initialized
0x81, 0x35, Drive is pulled out
0x81, 0x36, Outport is full
0x81, 0x3b, Cassette is in the transport element
0x81, 0x3c, Transport element failed to put cassette
0x81, 0x3d, Transport failed to get cassette
0x81, 0x42, Command data format is incorrect
0x81, 0x46, I/O port is used
0x81, 0x48, Servo went off (SERVO OFF1)
0x81, 0x49, Media size error
0x81, 0x4f, Communication with CC is abnormal (DMS-B35 only)
0x81, 0x53, Representative window is not initialized
0x81, 0x55, Drive is pulled out
0x81, 0x56, Output port is full
0x81, 0x59, Cassette type in source element is different from that in destination element
0x81, 0x5a, Specified BIN does not exist
0x81, 0x5b, Cassette is in the transport element
0x81, 0xa7, DMS recognized that the cassette carrier element is not connected
0x81, 0xa8, Communication error occurred between servo unit
0x81, 0xad, Communication error with junction port
0x81, 0xae, Communication error occurred between I/O port
0x81, 0xb0, Detected power failure
0x81, 0xb6, Trouble has occurred in barcode reader
0x81, 0xb7, Malfunction of transport element
0x81, 0xb8, Trouble has occurred in servo of cassette carrier element
0x81, 0xba, Trouble has occurred in destination element
0x81, 0xbb, Trouble has occurred in source element
0x81, 0xbd, Error occurred in junction port
0x81, 0xbe, Trouble has occurred in I/O port
0x81, 0xbf, Cassette is protruded and cassette carrier element cannot be moved
0x81, 0xc7, Transport element is not connected
0x81, 0xc8, Communication error occurred between servo unit
0x81, 0xcd, Communication error with junction port
0x81, 0xce, Communication error occurred between I/O port
0x81, 0xd0, Power is down and cannot execute cassette move command
0x81, 0xd6, Trouble has occurred in barcode reader
0x81, 0xd7, Malfunction of transport
0x81, 0xd8, Trouble has occurred in servo of cassette carrier element
0x81, 0xda, Trouble has occurred in destination element
0x81, 0xdb, Trouble has occurred in source element
0x81, 0xdd, Error occurred in junction port
0x81, 0xde, Trouble has occurred in I/O port
0x81, 0xdf, Cassette is protruded and cassette carrier element cannot be moved
0x81, 0xf9, Macro number is currently in use
0x81, 0xfa, Ended abnormally
0x81, 0xfb, Cassette move command cannot be executed for some reason
0x81, 0xfc, Reception macro reached the allowable number
0x81, 0xfd, Specified macro number does not exist
0x81, 0xfe, Macro has been canceled
0x81, 0xff, Macro has been canceled
0x82, 0x00, Data error(Could not read properly) (Sense Key = 0x03)
0x82, 0x00, Excessive connections or executed commands (Sense Key = 0x09)
0x82, 0x01, Cassette currently in use
0x82, 0x02, Cannot move due absence of bar code
0x82, 0x03, Drive is busy
0x82, 0x04, Communication with drive is not connected
0xff, 0x00, Drive errors
0xff, 0x01, Damaged header area (Sense Key = 0x03)
0xff, 0x01, Other Errors (Sense Key = 0x09)