""" A module for dealing with the polylines used throughout matplotlib. The primary class for polyline handling in matplotlib is :class:`Path`. Almost all vector drawing makes use of Paths somewhere in the drawing pipeline. Whilst a :class:`Path` instance itself cannot be drawn, there exists :class:`~matplotlib.artist.Artist` subclasses which can be used for convenient Path visualisation - the two most frequently used of these are :class:`~matplotlib.patches.PathPatch` and :class:`~matplotlib.collections.PathCollection`. """ from __future__ import (absolute_import, division, print_function, unicode_literals) from matplotlib.externals import six import math from weakref import WeakValueDictionary import numpy as np from numpy import ma from matplotlib import _path from matplotlib.cbook import simple_linear_interpolation, maxdict from matplotlib import rcParams class Path(object): """ :class:`Path` represents a series of possibly disconnected, possibly closed, line and curve segments. The underlying storage is made up of two parallel numpy arrays: - *vertices*: an Nx2 float array of vertices - *codes*: an N-length uint8 array of vertex types These two arrays always have the same length in the first dimension. For example, to represent a cubic curve, you must provide three vertices as well as three codes ``CURVE3``. The code types are: - ``STOP`` : 1 vertex (ignored) A marker for the end of the entire path (currently not required and ignored) - ``MOVETO`` : 1 vertex Pick up the pen and move to the given vertex. - ``LINETO`` : 1 vertex Draw a line from the current position to the given vertex. - ``CURVE3`` : 1 control point, 1 endpoint Draw a quadratic Bezier curve from the current position, with the given control point, to the given end point. - ``CURVE4`` : 2 control points, 1 endpoint Draw a cubic Bezier curve from the current position, with the given control points, to the given end point. - ``CLOSEPOLY`` : 1 vertex (ignored) Draw a line segment to the start point of the current polyline. Users of Path objects should not access the vertices and codes arrays directly. Instead, they should use :meth:`iter_segments` or :meth:`cleaned` to get the vertex/code pairs. This is important, since many :class:`Path` objects, as an optimization, do not store a *codes* at all, but have a default one provided for them by :meth:`iter_segments`. .. note:: The vertices and codes arrays should be treated as immutable -- there are a number of optimizations and assumptions made up front in the constructor that will not change when the data changes. """ # Path codes STOP = 0 # 1 vertex MOVETO = 1 # 1 vertex LINETO = 2 # 1 vertex CURVE3 = 3 # 2 vertices CURVE4 = 4 # 3 vertices CLOSEPOLY = 79 # 1 vertex #: A dictionary mapping Path codes to the number of vertices that the #: code expects. NUM_VERTICES_FOR_CODE = {STOP: 1, MOVETO: 1, LINETO: 1, CURVE3: 2, CURVE4: 3, CLOSEPOLY: 1} code_type = np.uint8 def __init__(self, vertices, codes=None, _interpolation_steps=1, closed=False, readonly=False): """ Create a new path with the given vertices and codes. Parameters ---------- vertices : array_like The ``(n, 2)`` float array, masked array or sequence of pairs representing the vertices of the path. If *vertices* contains masked values, they will be converted to NaNs which are then handled correctly by the Agg PathIterator and other consumers of path data, such as :meth:`iter_segments`. codes : {None, array_like}, optional n-length array integers representing the codes of the path. If not None, codes must be the same length as vertices. If None, *vertices* will be treated as a series of line segments. _interpolation_steps : int, optional Used as a hint to certain projections, such as Polar, that this path should be linearly interpolated immediately before drawing. This attribute is primarily an implementation detail and is not intended for public use. closed : bool, optional If *codes* is None and closed is True, vertices will be treated as line segments of a closed polygon. readonly : bool, optional Makes the path behave in an immutable way and sets the vertices and codes as read-only arrays. """ if ma.isMaskedArray(vertices): vertices = vertices.astype(np.float_).filled(np.nan) else: vertices = np.asarray(vertices, np.float_) if (vertices.ndim != 2) or (vertices.shape[1] != 2): msg = "'vertices' must be a 2D list or array with shape Nx2" raise ValueError(msg) if codes is not None: codes = np.asarray(codes, self.code_type) if (codes.ndim != 1) or len(codes) != len(vertices): msg = ("'codes' must be a 1D list or array with the same" " length of 'vertices'") raise ValueError(msg) if len(codes) and codes[0] != self.MOVETO: msg = ("The first element of 'code' must be equal to 'MOVETO':" " {0}") raise ValueError(msg.format(self.MOVETO)) elif closed: codes = np.empty(len(vertices), dtype=self.code_type) codes[0] = self.MOVETO codes[1:-1] = self.LINETO codes[-1] = self.CLOSEPOLY self._vertices = vertices self._codes = codes self._interpolation_steps = _interpolation_steps self._update_values() if readonly: self._vertices.flags.writeable = False if self._codes is not None: self._codes.flags.writeable = False self._readonly = True else: self._readonly = False @classmethod def _fast_from_codes_and_verts(cls, verts, codes, internals=None): """ Creates a Path instance without the expense of calling the constructor Parameters ---------- verts : numpy array codes : numpy array internals : dict or None The attributes that the resulting path should have. Allowed keys are ``readonly``, ``should_simplify``, ``simplify_threshold``, ``has_nonfinite`` and ``interpolation_steps``. """ internals = internals or {} pth = cls.__new__(cls) if ma.isMaskedArray(verts): verts = verts.astype(np.float_).filled(np.nan) else: verts = np.asarray(verts, np.float_) pth._vertices = verts pth._codes = codes pth._readonly = internals.pop('readonly', False) pth.should_simplify = internals.pop('should_simplify', True) pth.simplify_threshold = ( internals.pop('simplify_threshold', rcParams['path.simplify_threshold']) ) pth._has_nonfinite = internals.pop('has_nonfinite', False) pth._interpolation_steps = internals.pop('interpolation_steps', 1) if internals: raise ValueError('Unexpected internals provided to ' '_fast_from_codes_and_verts: ' '{0}'.format('\n *'.join(six.iterkeys( internals )))) return pth def _update_values(self): self._should_simplify = ( rcParams['path.simplify'] and (len(self._vertices) >= 128 and (self._codes is None or np.all(self._codes <= Path.LINETO))) ) self._simplify_threshold = rcParams['path.simplify_threshold'] self._has_nonfinite = not np.isfinite(self._vertices).all() @property def vertices(self): """ The list of vertices in the `Path` as an Nx2 numpy array. """ return self._vertices @vertices.setter def vertices(self, vertices): if self._readonly: raise AttributeError("Can't set vertices on a readonly Path") self._vertices = vertices self._update_values() @property def codes(self): """ The list of codes in the `Path` as a 1-D numpy array. Each code is one of `STOP`, `MOVETO`, `LINETO`, `CURVE3`, `CURVE4` or `CLOSEPOLY`. For codes that correspond to more than one vertex (`CURVE3` and `CURVE4`), that code will be repeated so that the length of `self.vertices` and `self.codes` is always the same. """ return self._codes @codes.setter def codes(self, codes): if self._readonly: raise AttributeError("Can't set codes on a readonly Path") self._codes = codes self._update_values() @property def simplify_threshold(self): """ The fraction of a pixel difference below which vertices will be simplified out. """ return self._simplify_threshold @simplify_threshold.setter def simplify_threshold(self, threshold): self._simplify_threshold = threshold @property def has_nonfinite(self): """ `True` if the vertices array has nonfinite values. """ return self._has_nonfinite @property def should_simplify(self): """ `True` if the vertices array should be simplified. """ return self._should_simplify @should_simplify.setter def should_simplify(self, should_simplify): self._should_simplify = should_simplify @property def readonly(self): """ `True` if the `Path` is read-only. """ return self._readonly def __copy__(self): """ Returns a shallow copy of the `Path`, which will share the vertices and codes with the source `Path`. """ import copy return copy.copy(self) copy = __copy__ def __deepcopy__(self): """ Returns a deepcopy of the `Path`. The `Path` will not be readonly, even if the source `Path` is. """ return self.__class__( self.vertices.copy(), self.codes.copy(), _interpolation_steps=self._interpolation_steps) deepcopy = __deepcopy__ @classmethod def make_compound_path_from_polys(cls, XY): """ Make a compound path object to draw a number of polygons with equal numbers of sides XY is a (numpolys x numsides x 2) numpy array of vertices. Return object is a :class:`Path` .. plot:: mpl_examples/api/histogram_path_demo.py """ # for each poly: 1 for the MOVETO, (numsides-1) for the LINETO, 1 for # the CLOSEPOLY; the vert for the closepoly is ignored but we still # need it to keep the codes aligned with the vertices numpolys, numsides, two = XY.shape if two != 2: raise ValueError("The third dimension of 'XY' must be 2") stride = numsides + 1 nverts = numpolys * stride verts = np.zeros((nverts, 2)) codes = np.ones(nverts, int) * cls.LINETO codes[0::stride] = cls.MOVETO codes[numsides::stride] = cls.CLOSEPOLY for i in range(numsides): verts[i::stride] = XY[:, i] return cls(verts, codes) @classmethod def make_compound_path(cls, *args): """Make a compound path from a list of Path objects.""" # Handle an empty list in args (i.e. no args). if not args: return Path(np.empty([0, 2], dtype=np.float32)) lengths = [len(x) for x in args] total_length = sum(lengths) vertices = np.vstack([x.vertices for x in args]) vertices.reshape((total_length, 2)) codes = np.empty(total_length, dtype=cls.code_type) i = 0 for path in args: if path.codes is None: codes[i] = cls.MOVETO codes[i + 1:i + len(path.vertices)] = cls.LINETO else: codes[i:i + len(path.codes)] = path.codes i += len(path.vertices) return cls(vertices, codes) def __repr__(self): return "Path(%r, %r)" % (self.vertices, self.codes) def __len__(self): return len(self.vertices) def iter_segments(self, transform=None, remove_nans=True, clip=None, snap=False, stroke_width=1.0, simplify=None, curves=True, sketch=None): """ Iterates over all of the curve segments in the path. Each iteration returns a 2-tuple (*vertices*, *code*), where *vertices* is a sequence of 1 - 3 coordinate pairs, and *code* is one of the :class:`Path` codes. Additionally, this method can provide a number of standard cleanups and conversions to the path. Parameters ---------- transform : None or :class:`~matplotlib.transforms.Transform` instance If not None, the given affine transformation will be applied to the path. remove_nans : {False, True}, optional If True, will remove all NaNs from the path and insert MOVETO commands to skip over them. clip : None or sequence, optional If not None, must be a four-tuple (x1, y1, x2, y2) defining a rectangle in which to clip the path. snap : None or bool, optional If None, auto-snap to pixels, to reduce fuzziness of rectilinear lines. If True, force snapping, and if False, don't snap. stroke_width : float, optional The width of the stroke being drawn. Needed as a hint for the snapping algorithm. simplify : None or bool, optional If True, perform simplification, to remove vertices that do not affect the appearance of the path. If False, perform no simplification. If None, use the should_simplify member variable. curves : {True, False}, optional If True, curve segments will be returned as curve segments. If False, all curves will be converted to line segments. sketch : None or sequence, optional If not None, must be a 3-tuple of the form (scale, length, randomness), representing the sketch parameters. """ if not len(self): return cleaned = self.cleaned(transform=transform, remove_nans=remove_nans, clip=clip, snap=snap, stroke_width=stroke_width, simplify=simplify, curves=curves, sketch=sketch) vertices = cleaned.vertices codes = cleaned.codes len_vertices = vertices.shape[0] # Cache these object lookups for performance in the loop. NUM_VERTICES_FOR_CODE = self.NUM_VERTICES_FOR_CODE STOP = self.STOP i = 0 while i < len_vertices: code = codes[i] if code == STOP: return else: num_vertices = NUM_VERTICES_FOR_CODE[code] curr_vertices = vertices[i:i+num_vertices].flatten() yield curr_vertices, code i += num_vertices def cleaned(self, transform=None, remove_nans=False, clip=None, quantize=False, simplify=False, curves=False, stroke_width=1.0, snap=False, sketch=None): """ Cleans up the path according to the parameters returning a new Path instance. .. seealso:: See :meth:`iter_segments` for details of the keyword arguments. Returns ------- Path instance with cleaned up vertices and codes. """ vertices, codes = _path.cleanup_path(self, transform, remove_nans, clip, snap, stroke_width, simplify, curves, sketch) internals = {'should_simplify': self.should_simplify and not simplify, 'has_nonfinite': self.has_nonfinite and not remove_nans, 'simplify_threshold': self.simplify_threshold, 'interpolation_steps': self._interpolation_steps} return Path._fast_from_codes_and_verts(vertices, codes, internals) def transformed(self, transform): """ Return a transformed copy of the path. .. seealso:: :class:`matplotlib.transforms.TransformedPath` A specialized path class that will cache the transformed result and automatically update when the transform changes. """ return Path(transform.transform(self.vertices), self.codes, self._interpolation_steps) def contains_point(self, point, transform=None, radius=0.0): """ Returns *True* if the path contains the given point. If *transform* is not *None*, the path will be transformed before performing the test. *radius* allows the path to be made slightly larger or smaller. """ if transform is not None: transform = transform.frozen() result = _path.point_in_path(point[0], point[1], radius, self, transform) return result def contains_points(self, points, transform=None, radius=0.0): """ Returns a bool array which is *True* if the path contains the corresponding point. If *transform* is not *None*, the path will be transformed before performing the test. *radius* allows the path to be made slightly larger or smaller. """ if transform is not None: transform = transform.frozen() result = _path.points_in_path(points, radius, self, transform) return result def contains_path(self, path, transform=None): """ Returns *True* if this path completely contains the given path. If *transform* is not *None*, the path will be transformed before performing the test. """ if transform is not None: transform = transform.frozen() return _path.path_in_path(self, None, path, transform) def get_extents(self, transform=None): """ Returns the extents (*xmin*, *ymin*, *xmax*, *ymax*) of the path. Unlike computing the extents on the *vertices* alone, this algorithm will take into account the curves and deal with control points appropriately. """ from .transforms import Bbox path = self if transform is not None: transform = transform.frozen() if not transform.is_affine: path = self.transformed(transform) transform = None return Bbox(_path.get_path_extents(path, transform)) def intersects_path(self, other, filled=True): """ Returns *True* if this path intersects another given path. *filled*, when True, treats the paths as if they were filled. That is, if one path completely encloses the other, :meth:`intersects_path` will return True. """ return _path.path_intersects_path(self, other, filled) def intersects_bbox(self, bbox, filled=True): """ Returns *True* if this path intersects a given :class:`~matplotlib.transforms.Bbox`. *filled*, when True, treats the path as if it was filled. That is, if one path completely encloses the other, :meth:`intersects_path` will return True. """ from .transforms import BboxTransformTo rectangle = self.unit_rectangle().transformed( BboxTransformTo(bbox)) result = self.intersects_path(rectangle, filled) return result def interpolated(self, steps): """ Returns a new path resampled to length N x steps. Does not currently handle interpolating curves. """ if steps == 1: return self vertices = simple_linear_interpolation(self.vertices, steps) codes = self.codes if codes is not None: new_codes = Path.LINETO * np.ones(((len(codes) - 1) * steps + 1, )) new_codes[0::steps] = codes else: new_codes = None return Path(vertices, new_codes) def to_polygons(self, transform=None, width=0, height=0): """ Convert this path to a list of polygons. Each polygon is an Nx2 array of vertices. In other words, each polygon has no ``MOVETO`` instructions or curves. This is useful for displaying in backends that do not support compound paths or Bezier curves, such as GDK. If *width* and *height* are both non-zero then the lines will be simplified so that vertices outside of (0, 0), (width, height) will be clipped. """ if len(self.vertices) == 0: return [] if transform is not None: transform = transform.frozen() if self.codes is None and (width == 0 or height == 0): if transform is None: return [self.vertices] else: return [transform.transform(self.vertices)] # Deal with the case where there are curves and/or multiple # subpaths (using extension code) return _path.convert_path_to_polygons(self, transform, width, height) _unit_rectangle = None @classmethod def unit_rectangle(cls): """ Return a :class:`Path` instance of the unit rectangle from (0, 0) to (1, 1). """ if cls._unit_rectangle is None: cls._unit_rectangle = \ cls([[0.0, 0.0], [1.0, 0.0], [1.0, 1.0], [0.0, 1.0], [0.0, 0.0]], [cls.MOVETO, cls.LINETO, cls.LINETO, cls.LINETO, cls.CLOSEPOLY], readonly=True) return cls._unit_rectangle _unit_regular_polygons = WeakValueDictionary() @classmethod def unit_regular_polygon(cls, numVertices): """ Return a :class:`Path` instance for a unit regular polygon with the given *numVertices* and radius of 1.0, centered at (0, 0). """ if numVertices <= 16: path = cls._unit_regular_polygons.get(numVertices) else: path = None if path is None: theta = (2*np.pi/numVertices * np.arange(numVertices + 1).reshape((numVertices + 1, 1))) # This initial rotation is to make sure the polygon always # "points-up" theta += np.pi / 2.0 verts = np.concatenate((np.cos(theta), np.sin(theta)), 1) codes = np.empty((numVertices + 1,)) codes[0] = cls.MOVETO codes[1:-1] = cls.LINETO codes[-1] = cls.CLOSEPOLY path = cls(verts, codes, readonly=True) if numVertices <= 16: cls._unit_regular_polygons[numVertices] = path return path _unit_regular_stars = WeakValueDictionary() @classmethod def unit_regular_star(cls, numVertices, innerCircle=0.5): """ Return a :class:`Path` for a unit regular star with the given numVertices and radius of 1.0, centered at (0, 0). """ if numVertices <= 16: path = cls._unit_regular_stars.get((numVertices, innerCircle)) else: path = None if path is None: ns2 = numVertices * 2 theta = (2*np.pi/ns2 * np.arange(ns2 + 1)) # This initial rotation is to make sure the polygon always # "points-up" theta += np.pi / 2.0 r = np.ones(ns2 + 1) r[1::2] = innerCircle verts = np.vstack((r*np.cos(theta), r*np.sin(theta))).transpose() codes = np.empty((ns2 + 1,)) codes[0] = cls.MOVETO codes[1:-1] = cls.LINETO codes[-1] = cls.CLOSEPOLY path = cls(verts, codes, readonly=True) if numVertices <= 16: cls._unit_regular_polygons[(numVertices, innerCircle)] = path return path @classmethod def unit_regular_asterisk(cls, numVertices): """ Return a :class:`Path` for a unit regular asterisk with the given numVertices and radius of 1.0, centered at (0, 0). """ return cls.unit_regular_star(numVertices, 0.0) _unit_circle = None @classmethod def unit_circle(cls): """ Return the readonly :class:`Path` of the unit circle. For most cases, :func:`Path.circle` will be what you want. """ if cls._unit_circle is None: cls._unit_circle = cls.circle(center=(0, 0), radius=1, readonly=True) return cls._unit_circle @classmethod def circle(cls, center=(0., 0.), radius=1., readonly=False): """ Return a Path representing a circle of a given radius and center. Parameters ---------- center : pair of floats The center of the circle. Default ``(0, 0)``. radius : float The radius of the circle. Default is 1. readonly : bool Whether the created path should have the "readonly" argument set when creating the Path instance. Notes ----- The circle is approximated using cubic Bezier curves. This uses 8 splines around the circle using the approach presented here: Lancaster, Don. `Approximating a Circle or an Ellipse Using Four Bezier Cubic Splines `_. """ MAGIC = 0.2652031 SQRTHALF = np.sqrt(0.5) MAGIC45 = np.sqrt((MAGIC*MAGIC) / 2.0) vertices = np.array([[0.0, -1.0], [MAGIC, -1.0], [SQRTHALF-MAGIC45, -SQRTHALF-MAGIC45], [SQRTHALF, -SQRTHALF], [SQRTHALF+MAGIC45, -SQRTHALF+MAGIC45], [1.0, -MAGIC], [1.0, 0.0], [1.0, MAGIC], [SQRTHALF+MAGIC45, SQRTHALF-MAGIC45], [SQRTHALF, SQRTHALF], [SQRTHALF-MAGIC45, SQRTHALF+MAGIC45], [MAGIC, 1.0], [0.0, 1.0], [-MAGIC, 1.0], [-SQRTHALF+MAGIC45, SQRTHALF+MAGIC45], [-SQRTHALF, SQRTHALF], [-SQRTHALF-MAGIC45, SQRTHALF-MAGIC45], [-1.0, MAGIC], [-1.0, 0.0], [-1.0, -MAGIC], [-SQRTHALF-MAGIC45, -SQRTHALF+MAGIC45], [-SQRTHALF, -SQRTHALF], [-SQRTHALF+MAGIC45, -SQRTHALF-MAGIC45], [-MAGIC, -1.0], [0.0, -1.0], [0.0, -1.0]], dtype=np.float_) codes = [cls.CURVE4] * 26 codes[0] = cls.MOVETO codes[-1] = cls.CLOSEPOLY return Path(vertices * radius + center, codes, readonly=readonly) _unit_circle_righthalf = None @classmethod def unit_circle_righthalf(cls): """ Return a :class:`Path` of the right half of a unit circle. The circle is approximated using cubic Bezier curves. This uses 4 splines around the circle using the approach presented here: Lancaster, Don. `Approximating a Circle or an Ellipse Using Four Bezier Cubic Splines `_. """ if cls._unit_circle_righthalf is None: MAGIC = 0.2652031 SQRTHALF = np.sqrt(0.5) MAGIC45 = np.sqrt((MAGIC*MAGIC) / 2.0) vertices = np.array( [[0.0, -1.0], [MAGIC, -1.0], [SQRTHALF-MAGIC45, -SQRTHALF-MAGIC45], [SQRTHALF, -SQRTHALF], [SQRTHALF+MAGIC45, -SQRTHALF+MAGIC45], [1.0, -MAGIC], [1.0, 0.0], [1.0, MAGIC], [SQRTHALF+MAGIC45, SQRTHALF-MAGIC45], [SQRTHALF, SQRTHALF], [SQRTHALF-MAGIC45, SQRTHALF+MAGIC45], [MAGIC, 1.0], [0.0, 1.0], [0.0, -1.0]], np.float_) codes = cls.CURVE4 * np.ones(14) codes[0] = cls.MOVETO codes[-1] = cls.CLOSEPOLY cls._unit_circle_righthalf = cls(vertices, codes, readonly=True) return cls._unit_circle_righthalf @classmethod def arc(cls, theta1, theta2, n=None, is_wedge=False): """ Return an arc on the unit circle from angle *theta1* to angle *theta2* (in degrees). If *n* is provided, it is the number of spline segments to make. If *n* is not provided, the number of spline segments is determined based on the delta between *theta1* and *theta2*. Masionobe, L. 2003. `Drawing an elliptical arc using polylines, quadratic or cubic Bezier curves `_. """ # degrees to radians theta1 *= np.pi / 180.0 theta2 *= np.pi / 180.0 twopi = np.pi * 2.0 halfpi = np.pi * 0.5 eta1 = np.arctan2(np.sin(theta1), np.cos(theta1)) eta2 = np.arctan2(np.sin(theta2), np.cos(theta2)) eta2 -= twopi * np.floor((eta2 - eta1) / twopi) # number of curve segments to make if n is None: n = int(2 ** np.ceil((eta2 - eta1) / halfpi)) if n < 1: raise ValueError("n must be >= 1 or None") deta = (eta2 - eta1) / n t = np.tan(0.5 * deta) alpha = np.sin(deta) * (np.sqrt(4.0 + 3.0 * t * t) - 1) / 3.0 steps = np.linspace(eta1, eta2, n + 1, True) cos_eta = np.cos(steps) sin_eta = np.sin(steps) xA = cos_eta[:-1] yA = sin_eta[:-1] xA_dot = -yA yA_dot = xA xB = cos_eta[1:] yB = sin_eta[1:] xB_dot = -yB yB_dot = xB if is_wedge: length = n * 3 + 4 vertices = np.zeros((length, 2), np.float_) codes = cls.CURVE4 * np.ones((length, ), cls.code_type) vertices[1] = [xA[0], yA[0]] codes[0:2] = [cls.MOVETO, cls.LINETO] codes[-2:] = [cls.LINETO, cls.CLOSEPOLY] vertex_offset = 2 end = length - 2 else: length = n * 3 + 1 vertices = np.empty((length, 2), np.float_) codes = cls.CURVE4 * np.ones((length, ), cls.code_type) vertices[0] = [xA[0], yA[0]] codes[0] = cls.MOVETO vertex_offset = 1 end = length vertices[vertex_offset:end:3, 0] = xA + alpha * xA_dot vertices[vertex_offset:end:3, 1] = yA + alpha * yA_dot vertices[vertex_offset+1:end:3, 0] = xB - alpha * xB_dot vertices[vertex_offset+1:end:3, 1] = yB - alpha * yB_dot vertices[vertex_offset+2:end:3, 0] = xB vertices[vertex_offset+2:end:3, 1] = yB return cls(vertices, codes, readonly=True) @classmethod def wedge(cls, theta1, theta2, n=None): """ Return a wedge of the unit circle from angle *theta1* to angle *theta2* (in degrees). If *n* is provided, it is the number of spline segments to make. If *n* is not provided, the number of spline segments is determined based on the delta between *theta1* and *theta2*. """ return cls.arc(theta1, theta2, n, True) _hatch_dict = maxdict(8) @classmethod def hatch(cls, hatchpattern, density=6): """ Given a hatch specifier, *hatchpattern*, generates a Path that can be used in a repeated hatching pattern. *density* is the number of lines per unit square. """ from matplotlib.hatch import get_path if hatchpattern is None: return None hatch_path = cls._hatch_dict.get((hatchpattern, density)) if hatch_path is not None: return hatch_path hatch_path = get_path(hatchpattern, density) cls._hatch_dict[(hatchpattern, density)] = hatch_path return hatch_path def clip_to_bbox(self, bbox, inside=True): """ Clip the path to the given bounding box. The path must be made up of one or more closed polygons. This algorithm will not behave correctly for unclosed paths. If *inside* is `True`, clip to the inside of the box, otherwise to the outside of the box. """ # Use make_compound_path_from_polys verts = _path.clip_path_to_rect(self, bbox, inside) paths = [Path(poly) for poly in verts] return self.make_compound_path(*paths) def get_path_collection_extents( master_transform, paths, transforms, offsets, offset_transform): """ Given a sequence of :class:`Path` objects, :class:`~matplotlib.transforms.Transform` objects and offsets, as found in a :class:`~matplotlib.collections.PathCollection`, returns the bounding box that encapsulates all of them. *master_transform* is a global transformation to apply to all paths *paths* is a sequence of :class:`Path` instances. *transforms* is a sequence of :class:`~matplotlib.transforms.Affine2D` instances. *offsets* is a sequence of (x, y) offsets (or an Nx2 array) *offset_transform* is a :class:`~matplotlib.transforms.Affine2D` to apply to the offsets before applying the offset to the path. The way that *paths*, *transforms* and *offsets* are combined follows the same method as for collections. Each is iterated over independently, so if you have 3 paths, 2 transforms and 1 offset, their combinations are as follows: (A, A, A), (B, B, A), (C, A, A) """ from .transforms import Bbox if len(paths) == 0: raise ValueError("No paths provided") return Bbox.from_extents(*_path.get_path_collection_extents( master_transform, paths, np.atleast_3d(transforms), offsets, offset_transform)) def get_paths_extents(paths, transforms=[]): """ Given a sequence of :class:`Path` objects and optional :class:`~matplotlib.transforms.Transform` objects, returns the bounding box that encapsulates all of them. *paths* is a sequence of :class:`Path` instances. *transforms* is an optional sequence of :class:`~matplotlib.transforms.Affine2D` instances to apply to each path. """ from .transforms import Bbox, Affine2D if len(paths) == 0: raise ValueError("No paths provided") return Bbox.from_extents(*_path.get_path_collection_extents( Affine2D(), paths, transforms, [], Affine2D())) def _define_deprecated_functions(ns): from .cbook import deprecated # The C++ functions are not meant to be used directly. # Users should use the more pythonic wrappers in the Path # class instead. for func, alternative in [ ('point_in_path', 'path.Path.contains_point'), ('get_path_extents', 'path.Path.get_extents'), ('point_in_path_collection', 'collection.Collection.contains'), ('path_in_path', 'path.Path.contains_path'), ('path_intersects_path', 'path.Path.intersects_path'), ('convert_path_to_polygons', 'path.Path.to_polygons'), ('cleanup_path', 'path.Path.cleaned'), ('points_in_path', 'path.Path.contains_points'), ('clip_path_to_rect', 'path.Path.clip_to_bbox')]: ns[func] = deprecated( since='1.3', alternative=alternative)(getattr(_path, func)) _define_deprecated_functions(locals())