-- ***************************************************************** -- CISCO-USP-MIB.my -- -- Copyright (c) 2015 by cisco Systems Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-USP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, NOTIFICATION-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TruthValue, TimeStamp, DateAndTime FROM SNMPv2-TC ciscoMgmt FROM CISCO-SMI; ciscoUspMIB MODULE-IDENTITY LAST-UPDATED "201507200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-cusp@cisco.com" DESCRIPTION "The MIB Module for the management of the Cisco Unified SIP Proxy (CUSP) service. CUSP is a Session Initiation Protocol (SIP) proxy server that helps enterprises aggregate their SIP elements into a centralized architecture in order to simplify and improve the flexibility of their network. MIB has OID's to monitor CUSP specific info like Server Group, Calls Per Second (CPS), Total Calls, Failed Calls, Dropped Calls, License, Up time CPU and Memory info and also traps on Server group elements, CPU and Memory threshold exceed, License exceed, Back up , process going down, Extensive logging and connection." REVISION "201507200000Z" DESCRIPTION "First version of this MIB module." ::= { ciscoMgmt 827 } -- Textual Conventions definition will be defined before this line ciscoUspMIBNotifs OBJECT IDENTIFIER ::= { ciscoUspMIB 0 } cuspSystemStateAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspNotifDetail, cuspSystemState } STATUS current DESCRIPTION "This notification is generated when the CUSP system goes up/down. This notification can be enabled/disabled by setting cuspSystemStateAlertEnable." ::= { ciscoUspMIBNotifs 1 } cuspServerGroupElementAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspElementName, cuspElementStatus } STATUS current DESCRIPTION "This notification is generated when server group element status changes. This notification can be enabled/disabled by setting cuspServerGroupElementAlertEnable." ::= { ciscoUspMIBNotifs 2 } cuspServerGroupAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspServerGroupName, cuspServerGroupStatus } STATUS current DESCRIPTION "This notification is generated when all the elements in the server group goes down or when any one element in the server group comes up after all the elements in the group were down. This notification can be enabled/disabled by setting cuspServerGroupAlertEnable." ::= { ciscoUspMIBNotifs 3 } cuspMemoryThresholdAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspMemoryThresholdValue, cuspConfiguredMemory, cuspMemoryUsed } STATUS current DESCRIPTION "This notification is generated when CUSP memory usage exceeds the cuspMemoryThresholdValue. This notification can be enabled/disabled by setting cuspMemoryThresholdAlertEnable." ::= { ciscoUspMIBNotifs 4 } cuspLicenseExceededAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspCPS, cuspLicenseLimit } STATUS current DESCRIPTION "This notification is generated when average CPS exceeds cuspLicenseLimit. This notification can be enabled/disabled by setting cuspLicenseExceededAlertEnable." ::= { ciscoUspMIBNotifs 5 } cuspLicenseStateAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspLicenseState } STATUS current DESCRIPTION "This notification is generated when CUSP license state changes. This notification can be enabled/disabled by setting cuspLicenseStateAlertEnable." ::= { ciscoUspMIBNotifs 6 } cuspExtensiveLoggingAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspNotifDetail } STATUS current DESCRIPTION "This notification is generated when extensive debug level logging is enabled in CUSP. Extensive logging might impact the performance and system stability. This notification can be enabled/disabled by setting cuspExtensiveLoggingAlertEnable." ::= { ciscoUspMIBNotifs 7 } cuspDiskSpaceThresholdAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspDiskSpaceThresholdValue, cuspDiskSpaceUsed } STATUS current DESCRIPTION "This notification is generated when the CUSP Disk usage exceeds the cuspDiskSpaceThresholdValue. This notification can be enabled/disabled by setting cuspDiskSpaceThresholdAlertEnable." ::= { ciscoUspMIBNotifs 8 } cuspBackupProcessFailAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspNotifDetail } STATUS current DESCRIPTION "This notification is generated when back up process fails. This notification can be enabled/disabled by setting cuspBackupProcessFailAlertEnable." ::= { ciscoUspMIBNotifs 9 } cuspConnectionExceptionAlert NOTIFICATION-TYPE OBJECTS { cuspNotifSeverity, cuspNotifDetail } STATUS current DESCRIPTION "This notification is generated when a connection exception occurs. This notification can be enabled/disabled by setting cuspConnectionExceptionAlertEnable." ::= { ciscoUspMIBNotifs 10 } ciscoUspMIBObjects OBJECT IDENTIFIER ::= { ciscoUspMIB 1 } ciscoUspMIBConform OBJECT IDENTIFIER ::= { ciscoUspMIB 2 } cuspScalar OBJECT IDENTIFIER ::= { ciscoUspMIBObjects 1 } cuspTable OBJECT IDENTIFIER ::= { ciscoUspMIBObjects 2 } -- Conformance Information Definition ciscoUspMIBCompliances OBJECT IDENTIFIER ::= { ciscoUspMIBConform 1 } ciscoUspMIBGroups OBJECT IDENTIFIER ::= { ciscoUspMIBConform 2 } ciscoUspMIBModuleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco USP MIB." MODULE -- this module MANDATORY-GROUPS { ciscoUspMIBMainObjectGroup, ciscoUspMIBNotifyGroup } ::= { ciscoUspMIBCompliances 1 } ciscoUspMIBMainObjectGroup OBJECT-GROUP OBJECTS { cuspLicenseLimit, cuspLastCounterResetTime, cuspTotalCalls, cuspTotalFailedCalls, cuspCPS, cuspAvgCPSOneMin, cuspMaxCPSOneMin, cuspDroppedCallsOneSec, cuspAvgDroppedCPSOneMin, cuspMaxDroppedCPSOneMin, cuspCallsRoutedOneSec, cuspAvgCallsRoutedOneMin, cuspMaxCallsRoutedOneMin, cuspCallsDroppedExceedingLicense, cuspSystemState, cuspSystemUpTime, cuspNoOfMessagesRecieved, cuspSmartAgentState, cuspStrayMessageCount, cuspConfiguredMemory, cuspMemoryUsed, cuspSystemStateAlertEnable, cuspServerGroupAlertEnable, cuspDiskSpaceThresholdAlertEnable, cuspBackupProcessFailAlertEnable, cuspExtensiveLoggingAlertEnable, cuspMemoryThresholdValue, cuspDiskSpaceThresholdValue, cuspServerGroupName, cuspServerGroupNetwork, cuspServerGroupStatus, cuspElementName, cuspElementStatus, cuspElementQValue, cuspElementWeight, cuspElementTransport, cuspElementTotalCalls, cuspElementFailedCalls, cuspNotifSeverity, cuspNotifDetail, cuspLicenseExceededAlertEnable, cuspServerGroupPingStatus, cuspServerGroupLBType, cuspDiskSpaceUsed, cuspElementPort, cuspServerGroupElementAlertEnable, cuspLicenseStateAlertEnable, cuspMemoryThresholdAlertEnable, cuspConnectionExceptionAlertEnable, cuspLicenseState } STATUS current DESCRIPTION "A collection of objects providing information on CUSP system parameters." ::= { ciscoUspMIBGroups 1 } ciscoUspMIBNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { cuspSystemStateAlert, cuspBackupProcessFailAlert, cuspDiskSpaceThresholdAlert, cuspConnectionExceptionAlert, cuspServerGroupElementAlert, cuspServerGroupAlert, cuspMemoryThresholdAlert, cuspLicenseExceededAlert, cuspExtensiveLoggingAlert, cuspLicenseStateAlert } STATUS current DESCRIPTION "A collection of notifications that are generated by the CUSP." ::= { ciscoUspMIBGroups 2 } cuspNotifControlInfo OBJECT IDENTIFIER ::= { ciscoUspMIBObjects 3 } cuspLastCounterResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the time stamp in date and time when the call counter was last reset. All counters related to calls, CPS and messages would be reset when counter is reset." ::= { cuspScalar 1 } cuspSystemState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the CUSP system state. 'up' - System is up. 'down' - System is either offline or going down." ::= { cuspScalar 2 } cuspSystemUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the CUSP system up time information." ::= { cuspScalar 3 } cuspLicenseLimit OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "CPS" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the maximum licensed CPS limit value. Calls will be rejected if the license limit is exceeded." ::= { cuspScalar 4 } cuspLicenseState OBJECT-TYPE SYNTAX INTEGER { waiting(1), overage(2), outofcompliance(3), notapplicable(4), invalidtag(5), invalid(6), init(7), incompliance(8), evalexpired(9), eval(10), disabled(11), authorizedperiodexpired(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the current license state of the CUSP. 'waiting' - The initial state after an entitlement request while waiting for the authorization request response. 'overage' - The entitlement is in overage. 'outofcompliance' - Requested entitlement is more than the available count. All calls will be rejected. 'notapplicable' - Enforcement mode is not applicable. 'invalidtag' - The entitlement tag is invalid. 'invalid' - Error condition state. 'init' - The initial state after the instance is created but before the entitlement is requested with. 'incompliance' - License registration and entitlement succeeded. 'evalexpired' - Evaluation period has expired. 'eval' - CUSP is using the evaluation period for this entitlement. 'disabled' - Smart Licensing has been deactivated or disabled. 'authorizedperiodexpired' - The authorized period has expired." ::= { cuspScalar 5 } cuspSmartAgentState OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), unidentified(2), evalexpired(3), registered(4), outofcomplaince(5), authorized(6), authorizationexpiry(7), transient(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the current license state of the Smart License Agent. 'unconfigured' - Smart licensing agent is not enabled and and all calls will be rejected in this state. 'unidentified' - Smart licensing is enabled and entitlement information is sent to the agent. Calls will be allowed in this state. 'evalexpired' - Smart agent will move to this state when evaluation period expires. All calls will be rejected in this state. 'transient' - Smart agent is in transient state. 'registered' - CUSP registered with the cloud server but license not yet authorized. 'outofcompliance' - Requested entitlement is more than the available count. All calls will be rejected. 'authorized' - License registration and entitlement succeeded. 'authorizationexpiry' - Renew request failed for more than 90 days. All calls will be rejected." ::= { cuspScalar 6 } cuspConfiguredMemory OBJECT-TYPE SYNTAX Unsigned32 UNITS "MegaByte" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total memory (RAM) in MB(MegaByte) configured on CUSP." ::= { cuspScalar 7 } cuspMemoryUsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "MegaByte" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the CUSP current memory (RAM) usage information in MB (MegaByte)." ::= { cuspScalar 8 } cuspDiskSpaceUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the current disk utilization of CUSP in MB (Mega Byte)." ::= { cuspScalar 9 } cuspCallStats OBJECT IDENTIFIER ::= { cuspScalar 10 } cuspMessageStats OBJECT IDENTIFIER ::= { cuspScalar 11 } cuspThresholdValues OBJECT IDENTIFIER ::= { cuspScalar 12 } cuspTotalCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total number of calls since the last counter reset." ::= { cuspCallStats 1 } cuspTotalFailedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total number of failed calls since last counter reset." ::= { cuspCallStats 2 } cuspCPS OBJECT-TYPE SYNTAX Unsigned32 UNITS "CPS" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the current running Calls Per Second (CPS) information." ::= { cuspCallStats 3 } cuspAvgCPSOneMin OBJECT-TYPE SYNTAX Unsigned32 UNITS "CPS" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the average CPS (Calls Per Second) in the last one minute." ::= { cuspCallStats 4 } cuspMaxCPSOneMin OBJECT-TYPE SYNTAX Unsigned32 UNITS "CPS" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the Maximum value of CPS (Calls Per Second) in the last one minute." ::= { cuspCallStats 5 } cuspDroppedCallsOneSec OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the count on number of calls dropped in the last one second." ::= { cuspCallStats 6 } cuspAvgDroppedCPSOneMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the average of 'dropped calls per second' in the last one minute." ::= { cuspCallStats 7 } cuspMaxDroppedCPSOneMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the Maximum of 'dropped calls per second' in the last one minute." ::= { cuspCallStats 8 } cuspCallsRoutedOneSec OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of calls routed through CUSP in last one second." ::= { cuspCallStats 9 } cuspAvgCallsRoutedOneMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the average of 'calls routed per second' in last one minute." ::= { cuspCallStats 10 } cuspMaxCallsRoutedOneMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the maximum of 'calls routed per second' in the last one minute." ::= { cuspCallStats 11 } cuspCallsDroppedExceedingLicense OBJECT-TYPE SYNTAX Unsigned32 UNITS "CPS" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total calls dropped due to exceeding license limit." ::= { cuspCallStats 12 } cuspStrayMessageCount OBJECT-TYPE SYNTAX Unsigned32 UNITS "Messages" MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of stray messages information. Stray messages are messages for which CUSP doesn't have a transaction." ::= { cuspMessageStats 1 } cuspNoOfMessagesRecieved OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total number of messages received." ::= { cuspMessageStats 2 } cuspDiskSpaceThresholdValue OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage threshold value configured by the user. If the percentage disk space utilization exceeds this limit then cuspDiskSpaceThresholdAlert notification is sent." ::= { cuspThresholdValues 1 } cuspMemoryThresholdValue OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage threshold value configured by the user. If the percentage memory utilization exceeds this limit then cuspMemoryThresholdAlert notification is sent." ::= { cuspThresholdValues 2 } cuspServerGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CuspServerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Server Groups. Server groups define the elements with which the Cisco Unified SIP Proxy system interacts for each network." ::= { cuspTable 1 } cuspServerGroupEntry OBJECT-TYPE SYNTAX CuspServerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the ServerGroup Table." INDEX { cuspServerGroupIndex } ::= { cuspServerGroupTable 1 } CuspServerGroupEntry ::= SEQUENCE { cuspServerGroupIndex Unsigned32, cuspServerGroupName OCTET STRING, cuspServerGroupNetwork OCTET STRING, cuspServerGroupStatus INTEGER, cuspServerGroupPingStatus TruthValue, cuspServerGroupLBType INTEGER } cuspServerGroupIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each server group." ::= { cuspServerGroupEntry 1 } cuspServerGroupName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the name of the server group." ::= { cuspServerGroupEntry 2 } cuspServerGroupNetwork OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the network name to which the server group belongs." ::= { cuspServerGroupEntry 3 } cuspServerGroupStatus OBJECT-TYPE SYNTAX INTEGER { up(1), partialdown(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the Server group status as up/partialdown/down. up - All the elements in the server group are up. partialdown - At least one element in the server group is down. down - All the elements in the server group are down." ::= { cuspServerGroupEntry 4 } cuspServerGroupPingStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives server group ping status. true - Ping is enabled. false - Ping is disabled." ::= { cuspServerGroupEntry 5 } cuspServerGroupLBType OBJECT-TYPE SYNTAX INTEGER { global(1), highestq(2), requesturi(3), callid(4), touri(5), weight(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the load balancing algorithm for the server group. global - Uses global load balance algorithm. highestq - Uses highestq algorithm where in CUSP picks the first available element with the higest q-value. requesturi - Hash algorithm is on Request-URI. callid - Hash algorithm is on Call-ID. touri - Hash algorithm is on To URI. weight - Uses weight-based scheme." ::= { cuspServerGroupEntry 6 } cuspElementTable OBJECT-TYPE SYNTAX SEQUENCE OF CuspElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of elements in a server group table. Also gives information on status(up/down) of the element, its Q value, weight and transport type." ::= { cuspTable 2 } cuspElementEntry OBJECT-TYPE SYNTAX CuspElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cuspElementTable." INDEX { cuspServerGroupIndex, cuspElementIndex } ::= { cuspElementTable 1 } CuspElementEntry ::= SEQUENCE { cuspElementIndex Unsigned32, cuspElementName OCTET STRING, cuspElementStatus INTEGER, cuspElementQValue OCTET STRING, cuspElementWeight Integer32, cuspElementPort Integer32, cuspElementTransport INTEGER, cuspElementTotalCalls Unsigned32, cuspElementFailedCalls Unsigned32 } cuspElementIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each element." ::= { cuspElementEntry 1 } cuspElementName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the Server group element ID." ::= { cuspElementEntry 2 } cuspElementStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the server group element status. 'up' - Server group element is up. 'down' - Server group element is down." ::= { cuspElementEntry 3 } cuspElementQValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the Q value of the server group element. Q value is a real number that specifies the priority of the server group element with respect to others in the server group. Q value range is 0.0 to 1.0." ::= { cuspElementEntry 4 } cuspElementWeight OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the weight of the server group element. Weight is used for load balancing between server group elements." ::= { cuspElementEntry 5 } cuspElementPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the port number of the server group element." ::= { cuspElementEntry 6 } cuspElementTransport OBJECT-TYPE SYNTAX INTEGER { udp(1), tcp(2), tls(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the transport type of the server group element. Transport type can be udp,tcp or tls." ::= { cuspElementEntry 7 } cuspElementTotalCalls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total routed calls to the server group element." ::= { cuspElementEntry 8 } cuspElementFailedCalls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the total failed calls on the server group element." ::= { cuspElementEntry 9 } cuspNotifSeverity OBJECT-TYPE SYNTAX INTEGER { error(1), warning(2), informational(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The classification on the event severity. 'error' - Significant problem. 'warning' - Not immediately significant. 'informational' - Information only." ::= { cuspNotifControlInfo 1 } cuspNotifDetail OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object gives the detailed information on error encountered." ::= { cuspNotifControlInfo 2 } cuspSystemStateAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls generation of cuspSystemStateAlert. When this is 'true', generation of Notification is enabled and when this variable is 'false', generation of Notification is disabled." ::= { cuspNotifControlInfo 3 } cuspServerGroupAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspServerGroupAlert." ::= { cuspNotifControlInfo 4 } cuspServerGroupElementAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspServerGroupElementAlert" ::= { cuspNotifControlInfo 5 } cuspLicenseExceededAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspLicenseExceededAlert." ::= { cuspNotifControlInfo 6 } cuspLicenseStateAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspLicenseStateAlert." ::= { cuspNotifControlInfo 7 } cuspExtensiveLoggingAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspExtensiveLoggingAlert." ::= { cuspNotifControlInfo 8 } cuspDiskSpaceThresholdAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspDiskSpaceThresholdAlert." ::= { cuspNotifControlInfo 9 } cuspMemoryThresholdAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspMemoryThresholdAlert." ::= { cuspNotifControlInfo 10 } cuspBackupProcessFailAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspBackupProcessFailAlert notification." ::= { cuspNotifControlInfo 11 } cuspConnectionExceptionAlertEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the generation of cuspConnectionExceptionAlert." ::= { cuspNotifControlInfo 12 } END