SCTE-HMS-MPEG-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, enterprises, Counter32, Integer32, Unsigned32, Counter64 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF DateAndTime, TruthValue, RowPointer, AutonomousType FROM SNMPv2-TC InterfaceIndex FROM IF-MIB InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB HePIDValue, ProgDataType FROM SCTE-HMS-HEADENDIDENT-TC-MIB; heMpegCommonMIB MODULE-IDENTITY LAST-UPDATED "200810031700Z" -- Oct 3, 2008 ORGANIZATION "SCTE HMS Subcommittee" CONTACT-INFO "SCTE HMS Subcommittee, Chairman mailto:standards@scte.org " DESCRIPTION "This MIB module is for representing MPEG equipment present in the headend and is supported by a SNMP agent. It defines both the MPEG input and output MIB objects for managing MPEG input and output transport streams, programs and elementary streams. It provides both input and output related statistics, as well as program mapping and video session information. All the tables, except mpegProgramMappingTable and mpegVideoSessionTable, capture and store the information related to active transport streams only. Optional MIB objects will have default values defined in this MIB file." REVISION "200810031700Z" DESCRIPTION "Resolved compile errors: 1. LAST-UPDATED date matches last REVISION date. 2. Removed illegal characters such as line feed (ascii 0xa0). 3. Added mpegInputTSActiveConnection to at least one conformance group. 4. Removed extra mpegSessionsGroup in compliance statement." REVISION "200810030649Z" -- Oct 3, 2008 DESCRIPTION "1. Added mpegInputTSActiveConnection entry. 2. Added mpegInputTSOutputSessionCreateTime. 3. Added mpegInputUdpOriginationInputTSIndex. 4. Added mpegOutputUdpDestinationOutputTSIndex." REVISION "200810030135Z" -- Oct 3, 2008 DESCRIPTION "Fixed spelling mistakes." REVISION "200810030000Z" -- Oct 3, 2008 DESCRIPTION "Changes included in the SCTE F2F meetings July 9-10 and Sept 24-25 1. mpegInputTSEntry, mpegOutputTSEntry, mpegProgESEntry are no longer indexed by ifIndex. 2. mpegInputTSTransportType and mpegInputTSPacketsDetected removed from mpegInputTSEntry to accomodate the Input extensibility such as udpOrigination. 3. Added to mpegInputTSEntry mpegInputTSConnectionType and mpegInputTSConnection. 4. mpegInputTSPatVersion and mpegInputTSCatVersion value -1 added to indicate unknown or not supported. 5. MpegProgESEntry sequence elements names updates to align with mpegProgES* prefix. 6. mpegStatsStreamTable renamed to mpegInputStatsTable. 7. mpegInputStatsPcrJitter and mpegInputStatsMaxPacketJitter support value -1 to indicate not supported measurement. 8. Added mpegInputUdpOriginationTable and mpegOutputUdpOriginationTable to generalize the input/output TS construct. 9. Updated parent OID of mpegInsertPacketTable to reflect the output nature of the construct. 10. Renamed mpegInsertPacketDeviceIndex as mpegInsertPacketDeviceIfIndex. 11. mpegOutputStatsTotalPackets set to 64 bits counter. 12.mpegOutputStatsChannelUtilization units set to 1 tenth of percent. 13. Added to mpegOutputTSEntry mpegOutputTSConnectionType and mpegOutputTSConnection. 14. mpegOutputProgNo changed ACCESS to read-only. 15. mpegOutputProgESPid renamed to mpegOutputProgElemStatsPid to preserve the construct prefix MpegOutputProgElemStats*. 16. Added mpegOutputUdpDestinationTable. 17. Deleted mpegProgramMappingDeviceChannelId and mpegProgramMappingInputIfIndex from MpegProgramMappingEntry. 18. MpegVideoSessionEntry Added: mpegVideoSessionPIDRemap, mpegVideoSessionMode, mpegVideoSessionEncryptionType, mpegVideoSessionEncryptionInfo, mpegVideoSessionBitRate, mpegVideoSessionSelectedInput. 19. MpegVideoSessionEntry Deleted: mpegVideoSessionUdpPort, mpegVideoSessionDestAddrType, mpegVideoSessionDestAddr, mpegVideoSessionSrcAddrType, mpegVideoSessionSrcAddr. 20. Added mpegVideoSessionPtrTable. 21. Updated mpegInputProgESGroup and mpegOutputProgElemStatsGroup description. 22. Updated OBJECT-GROUP mpegInputGroup, mpegInputProgESGroup, mpegOutputGroup, mpegMappingsGroup, mpegSessionsGroup. 23. Added mpegInputStatsPcrIntervalExceeds to the MPEG input statistics. 24. Added the table mpegInputUdpOriginationSessionTable." REVISION "200802041700Z" DESCRIPTION " Changes due to voting comments 1. Changed description of mpegInputTSPsiDetected. 2. Changed mpegInputTSRate, mpegInputTXMaxRate, mpegInsertPacketIndex, and mpegInsertPacketListId be Unsigned32 instead of Integer32. 3. Unit clause added to mpegOutputStatsAvailableBandwidth specifying bps. 4. Modified all references to QAM and used the word Device instead. 5. mpegOutputTSPmtInsertRate description changed, mpegOutputTSPmtInsertRate value changed to tables/ms. 6. mpegProgramMappingInputProgIndex in description changed rfDeviceInputProgIndex to mpegInputProgIndex. 7. mpegProgramMappingInputTSIndex in description changed rfDeviceInputTSIndex to mpgetInputTSIndex." REVISION "200712171700Z" DESCRIPTION " Changes due to voting comments 1. Removed TEXTUAL-CONVENTION import 2. Reworded the last sentence of the Module definition. 3. Reordered MIB tree to fit under the heDigital branch." REVISION "200710031700Z" DESCRIPTION " Added SCTE-HMS-HEADENDIDENT-TC name for HePidValue, remove name from this file. Created TC ProgDataType so it can be used everywhere. Removed 0 from enumerated types just for convention." ::= { enterprises scteRoot(5591) scteHmsTree(1) insidePlantIdent(11) heDigital(5) heDigitalMPEG(4) 1 } -- -- Textual Conventions can be found in SCTE-HMS-HEADENDIDENT-TC-MIB -- -- -- Node definitions -- mpegMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "This branch specifies the MPEG Common MIB objects that can be common to any device using MPEG." ::= { heMpegCommonMIB 1 } mpegDigitalInputs OBJECT-IDENTITY STATUS current DESCRIPTION "This branch specifies the attributes of the incoming streams to the MPEG device." ::= { mpegMIBObjects 1 } mpegOutputs OBJECT-IDENTITY STATUS current DESCRIPTION "This branch specifies the attributes of the output streams of the MPEG device." ::= { mpegMIBObjects 2 } mpegMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "This branch describes the different MPEG MIB object groups and the different levels of compliance." ::= { heMpegCommonMIB 2 } mpegMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "The different levels of compliance to the MPEG MIB." ::= { mpegMIBConformance 1 } mpegMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "The MPEG MIB object groups." ::= { mpegMIBConformance 2 } -- -- mpegDigitalInputs -- mpegLossOfSignalTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the loss of signal timeout on any incoming stream." ::= { mpegDigitalInputs 1 } mpegInputTSTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegInputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the attributes of video sessions or SPTSs." ::= { mpegDigitalInputs 2 } mpegInputTSEntry OBJECT-TYPE SYNTAX MpegInputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the attributes of a transport stream (SPTS/MPTS)." INDEX { mpegInputTSIndex } ::= { mpegInputTSTable 1 } MpegInputTSEntry ::= SEQUENCE { mpegInputTSIndex Unsigned32, mpegInputTSType INTEGER, mpegInputTSConnectionType INTEGER, mpegInputTSConnection RowPointer, mpegInputTSActiveConnection RowPointer, mpegInputTSPsiDetected TruthValue, mpegInputTSStartTime DateAndTime, mpegInputTSResourceAllocated TruthValue, mpegInputTSNumPrograms Unsigned32, mpegInputTSRate Unsigned32, mpegInputTSMaxRate Unsigned32, mpegInputTSPatVersion Integer32, mpegInputTSCatVersion Integer32, mpegInputTSNitPid HePIDValue, mpegInputTSNumEmms Unsigned32, mpegInputTSTSID Unsigned32, mpegInputTSLock INTEGER } mpegInputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the Input TS." ::= { mpegInputTSEntry 1 } mpegInputTSType OBJECT-TYPE SYNTAX INTEGER { spts (1), mpts (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of stream, e.g., SPTS or MPTS." ::= { mpegInputTSEntry 2 } mpegInputTSConnectionType OBJECT-TYPE SYNTAX INTEGER { other(1), udp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of input flow of the stream. The value 'udp' indicates either unicast or multicast udp origination flows." ::= { mpegInputTSEntry 3 } mpegInputTSConnection OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "The reference to the start of the data source table that feeds content to the input stream. For the Connection Type 'udp' this object contains the pointer to the first entry of the UDP Origination table Below is an example of the value expected for a Connection Type 'udp'. An input stream (mpegInputTSIndex = 8) is being feed by a udp Connection (mpegInputUdpOriginationIndex = 4) with 3 associated udp streams each one identified by mpegInputUdpOriginationId = 1,2,3. mpegInputTSEntry TSIndex ConnectionType Connection 1 1 2 1 ... 8 1 mpegInputUdpOriginationIfIndex.4.3 9 2 MpegInputUdpOriginationEntry UdpOriginationIndex UdpOriginationId 3 1,4,5 4 1,2,3 ..." ::= { mpegInputTSEntry 4 } mpegInputTSActiveConnection OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "The reference to the instance of the data source that is feeding the input stream. For the Connection Type 'udp' this object contains the pointer to the UDP Origination table that the input Stream is using. Below is an example of the value expected for a Connection Type 'udp'. An input stream (mpegInputTSIndex = 8) is being feed by a udp Connection (mpegInputUdpOriginationIndex = 4) have associated 3 udp streams each one identified by mpegInputUdpOriginationId = 1,2,3. The Udp stream 3 is currently used by the input transport stream. mpegInputTSEntry TSIndex ConnectionType ActiveConnection 1 1 2 1 ... 8 1 mpegInputUdpOriginationIfIndex.4.3 9 2 MpegInputUdpOriginationEntry UdpOriginationIndex UdpOriginationId 3 1,4,5 4 1,2,3 ... Note in the example that the sub oid 4 (in mpegInputUdpOriginationIfIndex.4.3) represents the sub-oid that aggregates all the udp origination flows associated with the transport stream." ::= { mpegInputTSEntry 5 } mpegInputTSPsiDetected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A simple check that Program Specific Information has or has not been detected. The value 'true' indicates PSI was detected." ::= { mpegInputTSEntry 6 } mpegInputTSStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the time the MPEG device started receiving the stream, i.e., the time the entry was added to the table." ::= { mpegInputTSEntry 7 } mpegInputTSResourceAllocated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, all resources have been allocated for the stream." ::= { mpegInputTSEntry 8 } mpegInputTSNumPrograms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of programs in the input transport stream." ::= { mpegInputTSEntry 9 } mpegInputTSRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The data rate of the incoming program or SPTS." ::= { mpegInputTSEntry 10 } mpegInputTSMaxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum data rate of the incoming stream for either a variable or constant bit rate stream (VBR/CVR)." ::= { mpegInputTSEntry 11 } mpegInputTSPatVersion OBJECT-TYPE SYNTAX Integer32 (-1..31) MAX-ACCESS read-only STATUS current DESCRIPTION "Program Association Table version of the transport stream. The value -1 means PAT version is not supported for input transport stream." DEFVAL { -1 } ::= { mpegInputTSEntry 12 } mpegInputTSCatVersion OBJECT-TYPE SYNTAX Integer32 (-1..31) MAX-ACCESS read-only STATUS current DESCRIPTION "The Conditional Access Table version number of transport stream. The value -1 means CAT version is not supported for input transport stream." DEFVAL { 0 } ::= { mpegInputTSEntry 13 } mpegInputTSNitPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "NIT PID of the input transport stream." ::= { mpegInputTSEntry 14 } mpegInputTSNumEmms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EMMs in the input stream. The default value 9999 means the device does not support encryption." DEFVAL { 9999 } ::= { mpegInputTSEntry 15 } mpegInputTSTSID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The input TSID of the transport stream. A valid TSID is of 16 bits length. If TSID is not supported, all 32-bits shall be set to 1." ::= { mpegInputTSEntry 16 } mpegInputTSLock OBJECT-TYPE SYNTAX INTEGER { locked(1), notLocked(2), intermittent(3), notMonitored(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the lock status of the transport stream. 'intermittent' means the transport stream is transitioning between lock and unlock state over a period of time. This condition is vendor-specific. 'notMonitored' means the device is not tracking the locking state." ::= { mpegInputTSEntry 17 } mpegInputProgTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegInputProgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describing the PSI of each incoming program." ::= { mpegDigitalInputs 3 } mpegInputProgEntry OBJECT-TYPE SYNTAX MpegInputProgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the parameters for each incoming program." INDEX { mpegInputTSIndex, mpegInputProgIndex } ::= { mpegInputProgTable 1 } MpegInputProgEntry ::= SEQUENCE { mpegInputProgIndex Unsigned32, mpegInputProgNo Unsigned32, mpegInputProgPmtVersion Unsigned32, mpegInputProgPmtPid HePIDValue, mpegInputProgPcrPid HePIDValue, mpegInputProgEcmPid HePIDValue, mpegInputProgNumElems Unsigned32, mpegInputProgNumEcms Unsigned32, mpegInputProgCaDescr OCTET STRING, mpegInputProgScte35Descr OCTET STRING, mpegInputProgScte18Descr OCTET STRING } mpegInputProgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object serves as the third index of this mib table. The index should uniquely identify a program given a transport stream index. In other words, it's unique within same transport stream." ::= { mpegInputProgEntry 1 } mpegInputProgNo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the identifier of the program present in the transport stream of the incoming video stream. This information is contained in PAT table." ::= { mpegInputProgEntry 2 } mpegInputProgPmtVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PMT version of the program. It is a 5-bit unsigned integer. The default value of 0 means input program PMT version is no supported." DEFVAL { 0 } ::= { mpegInputProgEntry 3 } mpegInputProgPmtPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "PMT PID of the program." ::= { mpegInputProgEntry 4 } mpegInputProgPcrPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "PCR PID of the program." ::= { mpegInputProgEntry 5 } mpegInputProgEcmPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the ECM PID of the program." ::= { mpegInputProgEntry 6 } mpegInputProgNumElems OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of elementary streams in the program." ::= { mpegInputProgEntry 7 } mpegInputProgNumEcms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ECMs for the program. The default value 9999 means the device does not support encryption." DEFVAL { 9999 } ::= { mpegInputProgEntry 8 } mpegInputProgCaDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Conditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific information such as ECMs. If any elementary stream is scrambled, a CA descriptor shall be present for the program containing that elementary stream. This object specifies the CA descriptor for this program. If the program does not have an associated CA descriptor, then this object has a zero-length string." ::= { mpegInputProgEntry 9 } mpegInputProgScte35Descr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "SCTE 35 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due to the fact that extensive decoding can be resource intensive and effect scalability. A zero-length string is returned. " ::= { mpegInputProgEntry 10 } mpegInputProgScte18Descr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "SCTE 18 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due to the fact that extensive decoding can be resource intensive and effect scalability. A zero-length string is returned. " ::= { mpegInputProgEntry 11 } mpegProgESTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegProgESEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the elementary streams in a program." ::= { mpegDigitalInputs 4 } mpegProgESEntry OBJECT-TYPE SYNTAX MpegProgESEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A combination of mpegInputTSIndex, mpegInputProgIndex and mpegProgESIndex uniquely identifies an entry in the mpegProgESTable." INDEX { mpegInputTSIndex, mpegInputProgIndex, mpegProgESIndex } ::= { mpegProgESTable 1 } MpegProgESEntry ::= SEQUENCE { mpegProgESIndex Unsigned32, mpegProgESPID Integer32, mpegProgESType ProgDataType, mpegProgESCaDescr OCTET STRING, mpegProgESScte35Descr OCTET STRING, mpegProgESScte18Descr OCTET STRING } mpegProgESIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of the elementary stream." ::= { mpegProgESEntry 1 } mpegProgESPID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the PID for each transport stream packet which carries the program element." ::= { mpegProgESEntry 2 } mpegProgESType OBJECT-TYPE SYNTAX ProgDataType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of elementary stream(video, audio, or data) of the incoming video session received from the video server." ::= { mpegProgESEntry 3 } mpegProgESCaDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "CA descriptor associated with the elementary stream. If there is no CA descriptor for the elementary stream, then this object has a zero-length string." ::= { mpegProgESEntry 4 } mpegProgESScte35Descr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "SCTE 35 descriptor. If not supported or present, a zero-length string is returned." ::= { mpegProgESEntry 5 } mpegProgESScte18Descr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "SCTE 18 descriptor. If not supported or present, a zero-length string is returned." ::= { mpegProgESEntry 6 } mpegInputStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegInputStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Stream statistics, SPTS or MPTS." ::= { mpegDigitalInputs 5 } mpegInputStatsEntry OBJECT-TYPE SYNTAX MpegInputStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes statistics for each Input TS." INDEX { mpegInputTSIndex } ::= { mpegInputStatsTable 1 } MpegInputStatsEntry ::= SEQUENCE { mpegInputStatsPcrJitter Integer32, mpegInputStatsMaxPacketJitter Integer32, mpegInputStatsPcrPackets Counter32, mpegInputStatsNonPcrPackets Counter32, mpegInputStatsUnexpectedPackets Counter32, mpegInputStatsContinuityErrors Counter32, mpegInputStatsSyncLossPackets Counter32, mpegInputStatsPcrIntervalExceeds Counter32 } mpegInputStatsPcrJitter OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) UNITS "nanoseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object stores the difference between the actual value of the PCR and its expected value. It is expressed in nanoseconds. This object is default to -1 if it's not supported." ::= { mpegInputStatsEntry 1 } mpegInputStatsMaxPacketJitter OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object stores the measurement of the maximum variation in arrival time or delay between individual packets. It is expressed in milliseconds. This object is default to -1 if it's not supported." ::= { mpegInputStatsEntry 2 } mpegInputStatsPcrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This reflects the number of MPEG transport packets, having PCR, received for the stream." ::= { mpegInputStatsEntry 3 } mpegInputStatsNonPcrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This reflects the number of MPEG transport packets, without PCR, received for the stream. " ::= { mpegInputStatsEntry 4 } mpegInputStatsUnexpectedPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This reflects the number of transport packets whose PIDs are not expected." ::= { mpegInputStatsEntry 5 } mpegInputStatsContinuityErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transport packets have continuity counters. Successive packets have contiguous values in the continuity counter. Continuity counter error occurs when the successive packets do not have contiguous value and discontinuity indicator is not set. This object reflects the number of continuity counter errors." ::= { mpegInputStatsEntry 6 } mpegInputStatsSyncLossPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "When a sync byte is missing in a MPEG packet this value is incremented. This value indicates the number of MPEG packets that had missing sync byte per stream." ::= { mpegInputStatsEntry 7 } mpegInputStatsPcrIntervalExceeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of times that the interval between two successive PCR packets for any program in the transport stream exceeds 100 milliseconds." ::= { mpegInputStatsEntry 8 } mpegInputUdpOriginationTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegInputUdpOriginationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the UDP unicast or multicast flows of an input transport stram. For unicast it represents the UDP port and optionally destination IP address of the input TS origination UDP IP flow. for Multicast it represents the set of SSM multicast groups of the input TS origination UDP IP flow." ::= { mpegDigitalInputs 6 } mpegInputUdpOriginationEntry OBJECT-TYPE SYNTAX MpegInputUdpOriginationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the IP UDP information of the input TS origination." INDEX { mpegInputUdpOriginationIndex, mpegInputUdpOriginationId } ::= { mpegInputUdpOriginationTable 1 } MpegInputUdpOriginationEntry ::= SEQUENCE { mpegInputUdpOriginationIndex Unsigned32, mpegInputUdpOriginationId Unsigned32, mpegInputUdpOriginationIfIndex InterfaceIndex, mpegInputUdpOriginationInetAddrType InetAddressType, mpegInputUdpOriginationSrcInetAddr InetAddress, mpegInputUdpOriginationDestInetAddr InetAddress, mpegInputUdpOriginationDestPort InetPortNumber, mpegInputUdpOriginationActive TruthValue, mpegInputUdpOriginationPacketsDetected TruthValue, mpegInputUdpOriginationRank Unsigned32, mpegInputUdpOriginationInputTSIndex Unsigned32 } mpegInputUdpOriginationIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the UDP input TS origination information." ::= { mpegInputUdpOriginationEntry 1 } mpegInputUdpOriginationId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of each UDP IP flow associated with the input TS UDP origination." ::= { mpegInputUdpOriginationEntry 2 } mpegInputUdpOriginationIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index where the UDP flow is being received." ::= { mpegInputUdpOriginationEntry 3 } mpegInputUdpOriginationInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type associated with input TS origination UDP IP flow. 'ipv4' and 'ipv6' are the only used types." ::= { mpegInputUdpOriginationEntry 4 } mpegInputUdpOriginationSrcInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "For Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP flow or the all zeros address if unknown or irrelevant for the input TS." ::= { mpegInputUdpOriginationEntry 5 } mpegInputUdpOriginationDestInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "For multicast it represents the group address of the SSM origination input TS. For unicast UDP IP flows is either the IP destination address of the udp flow or the all zeros address if unknown or irrelevant for the input TS." ::= { mpegInputUdpOriginationEntry 6 } mpegInputUdpOriginationDestPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP destination port of the UDP IP flow of the input TS." ::= { mpegInputUdpOriginationEntry 7 } mpegInputUdpOriginationActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The activation state of the UDP flow. The value 'true' indicates the UDP flow data stream is being sensed or buffered for the input TS, independently of that flow being used for a video session. Otherwise the value 'false' is reported. For multicast UDP origination flows the value 'true' indicates the UDP flow was successfully joined." ::= { mpegInputUdpOriginationEntry 8 } mpegInputUdpOriginationPacketsDetected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether UDP flow packets are being detected. It is vendor dependent the determination if packets for a UDP flow are being detected." ::= { mpegInputUdpOriginationEntry 9 } mpegInputUdpOriginationRank OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Rank Priority used to determine the UDP flow selected for the input TS processing and Video Session assignments." ::= { mpegInputUdpOriginationEntry 10 } mpegInputUdpOriginationInputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mpegInputTSIndex that this entry is associated with" ::= { mpegInputUdpOriginationEntry 11 } -- -- mpegOutputs -- mpegInsertPacketTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegInsertPacketEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes packet insertion information. Typical packets that are inserted at the RF output of a device are PSI, PSIP, and CVCT MPEG packets. These packets have their own PID. This table may be empty if the video device does not support packet insertion or do not have any packet insertion configured." ::= { mpegOutputs 1 } mpegInsertPacketEntry OBJECT-TYPE SYNTAX MpegInsertPacketEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Packet Management Table." INDEX { mpegInsertPacketIndex } ::= { mpegInsertPacketTable 1 } MpegInsertPacketEntry ::= SEQUENCE { mpegInsertPacketIndex Unsigned32, mpegInsertPacketListId Unsigned32, mpegInsertPacketImmediateExecution TruthValue, mpegInsertPacketStartTime DateAndTime, mpegInsertPacketRepeat INTEGER, mpegInsertPacketContinuousFlag TruthValue, mpegInsertPacketRate Unsigned32, mpegInsertPacketDeviceIfIndex InterfaceIndex } mpegInsertPacketIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65536) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of list of packets being inserted into all MPEG streams. This index is unique within the SNMP agent that may be managing multiple MPEG devices." ::= { mpegInsertPacketEntry 1 } mpegInsertPacketListId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference number of packets being inserted into MPEG stream." ::= { mpegInsertPacketEntry 2 } mpegInsertPacketImmediateExecution OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, packet insertion starts immediately." ::= { mpegInsertPacketEntry 3 } mpegInsertPacketStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Unix epoch start time for insertions (if Immediate Execution is false)." ::= { mpegInsertPacketEntry 4 } mpegInsertPacketRepeat OBJECT-TYPE SYNTAX INTEGER { repeat (1), oneTime (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the insert packet is one-time or repetitive." ::= { mpegInsertPacketEntry 5 } mpegInsertPacketContinuousFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, packet will be sent periodically, until cancelled." ::= { mpegInsertPacketEntry 6 } mpegInsertPacketRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Rate at which packet list should be inserted." ::= { mpegInsertPacketEntry 7 } mpegInsertPacketDeviceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the output device interface that the packet will be inserted at." ::= { mpegInsertPacketEntry 8 } mpegOutputStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegOutputStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the diagnostic stats objects for the outputs transport stream of an MPEG device." ::= { mpegOutputs 2 } mpegOutputStatsEntry OBJECT-TYPE SYNTAX MpegOutputStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the diagnostics for each output TS." INDEX { mpegOutputTSIndex } ::= { mpegOutputStatsTable 1 } MpegOutputStatsEntry ::= SEQUENCE { mpegOutputStatsDroppedPackets Counter32, mpegOutputStatsFifoOverflow Counter32, mpegOutputStatsFifoUnderflow Counter32, mpegOutputStatsDataRate Unsigned32, mpegOutputStatsAvailableBandwidth Unsigned32, mpegOutputStatsChannelUtilization Integer32, mpegOutputStatsTotalPackets Counter64 } mpegOutputStatsDroppedPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MPEG packets dropped on this output transport stream." ::= { mpegOutputStatsEntry 1 } mpegOutputStatsFifoOverflow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of FIFO overflows on this output transport stream." ::= { mpegOutputStatsEntry 2 } mpegOutputStatsFifoUnderflow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of FIFO underflows on this output transport stream." ::= { mpegOutputStatsEntry 3 } mpegOutputStatsDataRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Data rate for the content on this output transport stream." ::= { mpegOutputStatsEntry 4 } mpegOutputStatsAvailableBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Unused bandwidth on this port." ::= { mpegOutputStatsEntry 5 } mpegOutputStatsChannelUtilization OBJECT-TYPE SYNTAX Integer32 (-1|0..1000) UNITS "0.1 Percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The current utilization of a channel defined as (measured data rate / total bandwidth ) * 1000. If not applicable, a value of -1 is returned." ::= { mpegOutputStatsEntry 6 } mpegOutputStatsTotalPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets output for this transport stream since the start of the output stream." ::= { mpegOutputStatsEntry 7 } mpegOutputTSTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegOutputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the attributes of an outgoing transport stream SPTS or MPTS." ::= { mpegOutputs 3 } mpegOutputTSEntry OBJECT-TYPE SYNTAX MpegOutputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the attributes of an output transport stream, SPTS or MPTS." INDEX { mpegOutputTSIndex } ::= { mpegOutputTSTable 1 } MpegOutputTSEntry ::= SEQUENCE { mpegOutputTSIndex Unsigned32, mpegOutputTSType INTEGER, mpegOutputTSConnectionType INTEGER, mpegOutputTSConnection RowPointer, mpegOutputTSNumPrograms Unsigned32, mpegOutputTSTSID Unsigned32, mpegOutputTSNitPid HePIDValue, mpegOutputTSCaPid HePIDValue, mpegOutputTSCatInsertRate Unsigned32, mpegOutputTSPatInsertRate Unsigned32, mpegOutputTSPmtInsertRate Unsigned32, mpegOutputTSStartTime DateAndTime } mpegOutputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table index. It uniquely identifies a mpegOutputTSEntry. This index is independent from mpegOutputTSTSID." ::= { mpegOutputTSEntry 1 } mpegOutputTSType OBJECT-TYPE SYNTAX INTEGER { spts (1), mpts (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of stream, e.g., SPTS or MPTS." ::= { mpegOutputTSEntry 2 } mpegOutputTSConnectionType OBJECT-TYPE SYNTAX INTEGER { other(1), qam(2), udp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of output flow of the stream. The value 'qam' indicates a QAM output for the stream The value 'udp' indicates either unicast or multicast udp destination flows for the stream." ::= { mpegOutputTSEntry 3 } mpegOutputTSConnection OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "The reference to the instance of the output connection fpr the output stream. For the Connection Type 'qam' this object contains the ifIndex object identifier of the QAM channel for the output stream. For the Connection Type 'udp' this object contains the pointer to the UDP Destination table being used for the output stream. This is similar to mpegInputTSConnection - See description for details." ::= { mpegOutputTSEntry 4 } mpegOutputTSNumPrograms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of programs in the output transport stream." ::= { mpegOutputTSEntry 5 } mpegOutputTSTSID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The TSID of the output transport stream." ::= { mpegOutputTSEntry 6 } mpegOutputTSNitPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "NIT PID of the outgoing transport stream." ::= { mpegOutputTSEntry 7 } mpegOutputTSCaPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "The CA PID of the outgoing transport stream." ::= { mpegOutputTSEntry 8 } mpegOutputTSCatInsertRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "tables/ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The CAT insertion rate." ::= { mpegOutputTSEntry 9 } mpegOutputTSPatInsertRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "tables/ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The PAT table interval expressed in ms." ::= { mpegOutputTSEntry 10 } mpegOutputTSPmtInsertRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "tables/ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The PMT insertion rate. This is expressed in tables/second." ::= { mpegOutputTSEntry 11 } mpegOutputTSStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the time the MPEG device started transmitting the output stream, i.e., the time the entry was added to the table. The support of this object is optional. If not supported, this object is default to a zero length string." ::= { mpegOutputTSEntry 12 } mpegOutputProgTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegOutputProgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describing the PSI of each outgoing program." ::= { mpegOutputs 4 } mpegOutputProgEntry OBJECT-TYPE SYNTAX MpegOutputProgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the parameters for each incoming program." INDEX { mpegOutputTSIndex, mpegOutputProgIndex } ::= { mpegOutputProgTable 1 } MpegOutputProgEntry ::= SEQUENCE { mpegOutputProgIndex Unsigned32, mpegOutputProgNo Unsigned32, mpegOutputProgPmtVersion Unsigned32, mpegOutputProgPmtPid HePIDValue, mpegOutputProgPcrPid HePIDValue, mpegOutputProgEcmPid HePIDValue, mpegOutputProgNumElems Unsigned32, mpegOutputProgNumEcms Unsigned32, mpegOutputProgCaDescr OCTET STRING, mpegOutputProgScte35Descr OCTET STRING, mpegOutputProgScte18Descr OCTET STRING } mpegOutputProgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the table index for output program." ::= { mpegOutputProgEntry 1 } mpegOutputProgNo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the identifier of the program present in the transport stream of the outgoing program." ::= { mpegOutputProgEntry 2 } mpegOutputProgPmtVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PMT version of the outgoing program. The default value of 0 means output program PMT version is not supported." DEFVAL { 0 } ::= { mpegOutputProgEntry 3 } mpegOutputProgPmtPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "PMT PID of the outgoing program." ::= { mpegOutputProgEntry 4 } mpegOutputProgPcrPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "PCR PID of the outgoing program." ::= { mpegOutputProgEntry 5 } mpegOutputProgEcmPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the ECM PID of the outgoing program." ::= { mpegOutputProgEntry 6 } mpegOutputProgNumElems OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of elementary streams in the outgoing program." ::= { mpegOutputProgEntry 7 } mpegOutputProgNumEcms OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ECMs for the outgoing program. The default value 9999 means the device does not support encryption." DEFVAL { 9999 } ::= { mpegOutputProgEntry 8 } mpegOutputProgCaDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Conditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific information such as ECMs. If any elementary stream is scrambled, a CA descriptor shall be present for the program containing that elementary stream. This object specifies the CA descriptor for this program. If the outgoing program does not have an associated CA descriptor, then this object has a zero-length string." ::= { mpegOutputProgEntry 9 } mpegOutputProgScte35Descr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "SCTE 35 descriptor in the outgoing program. This object is set to a string of zero-length if there's no SCTE 35 descriptor in the outgoing program or not supported." ::= { mpegOutputProgEntry 10 } mpegOutputProgScte18Descr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "SCTE 18 descriptor. If not present or not supported, a zero-length string is returned." ::= { mpegOutputProgEntry 11 } mpegOutputProgElemStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegOutputProgElemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The stats associated with the elementary streams of an MPEG program." ::= { mpegOutputs 5 } mpegOutputProgElemStatsEntry OBJECT-TYPE SYNTAX MpegOutputProgElemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry constitutes the stats for a program associated with a transport stream." INDEX { mpegOutputTSIndex, mpegOutputProgIndex, mpegOutputProgElemStatsIndex } ::= { mpegOutputProgElemStatsTable 1 } MpegOutputProgElemStatsEntry ::= SEQUENCE { mpegOutputProgElemStatsIndex Unsigned32, mpegOutputProgElemStatsPid HePIDValue, mpegOutputProgElemStatsElemType INTEGER, mpegOutputProgElemStatsDataRate Integer32 } mpegOutputProgElemStatsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the elementary stream." ::= { mpegOutputProgElemStatsEntry 1 } mpegOutputProgElemStatsPid OBJECT-TYPE SYNTAX HePIDValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Pid of output program elementary stream." ::= { mpegOutputProgElemStatsEntry 2 } mpegOutputProgElemStatsElemType OBJECT-TYPE SYNTAX INTEGER { video (1), audio (2), data (3), scte18 (4), scte35 (5), unknown (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of elementary stream (video, audio, or data) of the program. Some devices, such as device, may choose not to report exact type due to scalability issues, in which case, this object shall be set to unknown." ::= { mpegOutputProgElemStatsEntry 3 } mpegOutputProgElemStatsDataRate OBJECT-TYPE SYNTAX Integer32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "The data rate of the elementary stream. Return -1 if not supported." ::= { mpegOutputProgElemStatsEntry 4 } mpegOutputUdpDestinationTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegOutputUdpDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the UDP unicast or multicast of the output TS this entry references. For unicast it represents the UDP port and optionally destination IP address of the output TS destination UDP IP flow. for Multicast it represents the set of SSM multicast groups of the output TS destination UDP IP flow." ::= { mpegOutputs 6 } mpegOutputUdpDestinationEntry OBJECT-TYPE SYNTAX MpegOutputUdpDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the IP UDP information of the output TS destination." INDEX { mpegOutputUdpDestinationIndex, mpegOutputUdpDestinationId } ::= { mpegOutputUdpDestinationTable 1 } MpegOutputUdpDestinationEntry ::= SEQUENCE { mpegOutputUdpDestinationIndex Unsigned32, mpegOutputUdpDestinationId Unsigned32, mpegOutputUdpDestinationIfIndex InterfaceIndex, mpegOutputUdpDestinationInetAddrType InetAddressType, mpegOutputUdpDestinationSrcInetAddr InetAddress, mpegOutputUdpDestinationDestInetAddr InetAddress, mpegOutputUdpDestinationDestPort InetPortNumber, mpegOutputUdpDestinationOutputTSIndex Unsigned32 } mpegOutputUdpDestinationIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of the UDP output TS destination information." ::= { mpegOutputUdpDestinationEntry 1 } mpegOutputUdpDestinationId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier of each UDP IP flow associated with the output TS UDP destination." ::= { mpegOutputUdpDestinationEntry 2 } mpegOutputUdpDestinationIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index where the UDP flow is being sent." ::= { mpegOutputUdpDestinationEntry 3 } mpegOutputUdpDestinationInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type associated with output TS destination UDP IP flow." ::= { mpegOutputUdpDestinationEntry 4 } mpegOutputUdpDestinationSrcInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "For Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP flow or the all zeros address if unknown or irrelevant for the destination output TS." ::= { mpegOutputUdpDestinationEntry 5 } mpegOutputUdpDestinationDestInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "For multicast it represents the group address of the SSM destination output TS. For unicast UDP IP flows is either the IP destination address of the udp flow or the all zeros address if unknown or irrelevant for the destination output TS." ::= { mpegOutputUdpDestinationEntry 6 } mpegOutputUdpDestinationDestPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port of the UDP IP flow of the output TS." ::= { mpegOutputUdpDestinationEntry 7 } mpegOutputUdpDestinationOutputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mpegOutputTSIndex that this entry is associated with." ::= { mpegOutputUdpDestinationEntry 8 } mpegProgramMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegProgramMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes program mappings, i.e., ties the input destination to the output destination for every program active in the device." ::= { mpegMIBObjects 3 } mpegProgramMappingEntry OBJECT-TYPE SYNTAX MpegProgramMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the mapping, i.e., ties input destination to output destination for a given program." INDEX { mpegProgramMappingIndex } ::= { mpegProgramMappingTable 1 } MpegProgramMappingEntry ::= SEQUENCE { mpegProgramMappingIndex Unsigned32, mpegProgramMappingOutputProgIndex Unsigned32, mpegProgramMappingOutputTSIndex Unsigned32, mpegProgramMappingInputProgIndex Unsigned32, mpegProgramMappingInputTSIndex Unsigned32 } mpegProgramMappingIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table index uniquely identifies an entry in mpegProgramMappingTable. This index should be unique within the same SNMP agent that may be managing multiple MPEG devices." ::= { mpegProgramMappingEntry 1 } mpegProgramMappingOutputProgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is set to mpegOutputProgIndex of the corresponding entry in mpegOutputProgTable for a given output program." ::= { mpegProgramMappingEntry 2 } mpegProgramMappingOutputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is set to mpegOutputTSIndex of the corresponding entry in mpegOutputProgTable for a given output program." ::= { mpegProgramMappingEntry 3 } mpegProgramMappingInputProgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is set to the value of mpegInputProgIndex of the corresponding entry in mpegInputProgTable for a given input program." ::= { mpegProgramMappingEntry 4 } mpegProgramMappingInputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is set to the value of mpegInputTSIndex of the corresponding entry in mpegInputProgTable for a given input program." ::= { mpegProgramMappingEntry 5 } mpegVideoSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegVideoSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to store video session information. The session may be of VOD, SDV or DB type. It captures logical information about a video stream, such as source and destination addresses, UDP port etc, and also ties it with its direct mapping of input and output programs. This table captures video sessions provisioned by both session-based and table-based method. It is capable to support N-M mapping of video programs that's required for redundant source or video stream cloning etc." ::= { mpegMIBObjects 4 } mpegVideoSessionEntry OBJECT-TYPE SYNTAX MpegVideoSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes a logical video session." INDEX { mpegVideoSessionIndex } ::= { mpegVideoSessionTable 1 } MpegVideoSessionEntry ::= SEQUENCE { mpegVideoSessionIndex Unsigned32, mpegVideoSessionPhyMappingIndex Unsigned32, mpegVideoSessionPIDRemap TruthValue, mpegVideoSessionMode INTEGER, mpegVideoSessionState INTEGER, mpegVideoSessionProvMethod INTEGER, mpegVideoSessionEncryptionType INTEGER, mpegVideoSessionEncryptionInfo AutonomousType, mpegVideoSessionBitRate Unsigned32, mpegVideoSessionID OCTET STRING, mpegVideoSessionSelectedInput RowPointer, mpegVideoSessionSelectedOutput RowPointer } mpegVideoSessionIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table index uniquely identifies an entry in mpegVideoSessionTable. This index should be unique within the same SNMP agent that may be managing multiple MPEG devices." ::= { mpegVideoSessionEntry 1 } mpegVideoSessionPhyMappingIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shall be set to mpegProgramMappingIndex of the corresponding mpegProgramMappingEntry which contains physical mapping between the input and output program." ::= { mpegVideoSessionEntry 2 } mpegVideoSessionPIDRemap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object value 'true' indicates that the session has PID remapping. The value 'false' indicates that the session has no PID remapping." ::= { mpegVideoSessionEntry 3 } mpegVideoSessionMode OBJECT-TYPE SYNTAX INTEGER { other(1), passThrough(2), multiplexing(3) --explicit session } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the transport stream is associated with a multiplexed session or is pass-through. For pass-through type transport streams, all elementary stream level information in optional." ::= { mpegVideoSessionEntry 4 } mpegVideoSessionState OBJECT-TYPE SYNTAX INTEGER { active (1), provisioned (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "active means in-use, provisioned means not-in-use or active such as video session provisioned for redundant source." ::= { mpegVideoSessionEntry 5 } mpegVideoSessionProvMethod OBJECT-TYPE SYNTAX INTEGER { tableBased (1), sessionBased (2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of session, e.g., in QAM table-based or session-based." ::= { mpegVideoSessionEntry 6 } mpegVideoSessionEncryptionType OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), preencrypted(3), des(4), des3(5), aes(6), dvbCsa(7), pkey(8), mediac(9), dvs042(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the encryption algorithm of the session." ::= { mpegVideoSessionEntry 7 } mpegVideoSessionEncryptionInfo OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates a vendor-specific reference to information associated to the session encryption algorithm." ::= { mpegVideoSessionEntry 8 } mpegVideoSessionBitRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates a session throughtput in bps." ::= { mpegVideoSessionEntry 9 } mpegVideoSessionID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The session ID associated with the stream in the case of a session-based QAM. This is not applicable to a table-based QAM. This ID may be used by NMS system to uniquely identify an input program to output program mapping." ::= { mpegVideoSessionEntry 10 } mpegVideoSessionSelectedInput OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "The reference to the entry of the input flow currently being used in the video session." ::= { mpegVideoSessionEntry 11 } mpegVideoSessionSelectedOutput OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "The reference to the entry of the output flow currently being used in the video session." ::= { mpegVideoSessionEntry 12 } mpegVideoSessionPtrTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegVideoSessionPtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to provide a quick reference of the Program Mapping and input/output TS connection information associated with a Video Session." ::= { mpegMIBObjects 5 } mpegVideoSessionPtrEntry OBJECT-TYPE SYNTAX MpegVideoSessionPtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the associations with ProgramMapping and transport stream connections." INDEX { mpegVideoSessionIndex, mpegVideoSessionPtrInputProgIndex, mpegVideoSessionPtrInputTSIndex, mpegVideoSessionPtrInputTSConnType, mpegVideoSessionPtrInputTSConnection, mpegVideoSessionPtrOutputProgIndex, mpegVideoSessionPtrOutputTSIndex, mpegVideoSessionPtrOutputTSConnType, mpegVideoSessionPtrOutputTSConnection } ::= { mpegVideoSessionPtrTable 1 } MpegVideoSessionPtrEntry ::= SEQUENCE { mpegVideoSessionPtrInputProgIndex Unsigned32, mpegVideoSessionPtrInputTSIndex Unsigned32, mpegVideoSessionPtrInputTSConnType Unsigned32, mpegVideoSessionPtrInputTSConnection Unsigned32, mpegVideoSessionPtrOutputProgIndex Unsigned32, mpegVideoSessionPtrOutputTSIndex Unsigned32, mpegVideoSessionPtrOutputTSConnType Unsigned32, mpegVideoSessionPtrOutputTSConnection Unsigned32, mpegVideoSessionPtrStatus INTEGER } mpegVideoSessionPtrInputProgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Input Program index value of the video session." ::= { mpegVideoSessionPtrEntry 1 } mpegVideoSessionPtrInputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input TS index value of the video session." ::= { mpegVideoSessionPtrEntry 2 } mpegVideoSessionPtrInputTSConnType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Input TS Connection type value of the video session." ::= { mpegVideoSessionPtrEntry 3 } mpegVideoSessionPtrInputTSConnection OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Input TS Connection value of the video session." ::= { mpegVideoSessionPtrEntry 4 } mpegVideoSessionPtrOutputProgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Output Program index value of the video session." ::= { mpegVideoSessionPtrEntry 5 } mpegVideoSessionPtrOutputTSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Output TS index value of the video session." ::= { mpegVideoSessionPtrEntry 6 } mpegVideoSessionPtrOutputTSConnType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Output TS Connection type value of the video session." ::= { mpegVideoSessionPtrEntry 7 } mpegVideoSessionPtrOutputTSConnection OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Output TS Connection value of the video session." ::= { mpegVideoSessionPtrEntry 8 } mpegVideoSessionPtrStatus OBJECT-TYPE SYNTAX INTEGER { active(1), closed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the session. Only active sessions need to be reported." ::= { mpegVideoSessionPtrEntry 9 } mpegInputTSOutputSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF MpegInputTSOutputSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the list of Output Session indexes that the Input TS entry is feeding. For unicast it will typically point to just one output Session. For multicast, it will point to all the output Sessions using this internally replicated input TS." ::= { mpegMIBObjects 6 } mpegInputTSOutputSessionEntry OBJECT-TYPE SYNTAX MpegInputTSOutputSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies the sessionID associated with the Input TS Entry Index." INDEX { mpegInputTSIndex, mpegVideoSessionIndex } ::= { mpegInputTSOutputSessionTable 1 } MpegInputTSOutputSessionEntry ::= SEQUENCE { mpegInputTSOutputSessionCreateTime DateAndTime } mpegInputTSOutputSessionCreateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Creation Time of the session referenced by this entry." ::= { mpegInputTSOutputSessionEntry 1 } mpegSupport MODULE-COMPLIANCE STATUS current DESCRIPTION "These objects describe the support level for MPEG." MODULE MANDATORY-GROUPS { mpegInputGroup, mpegOutputGroup } GROUP mpegMappingsGroup DESCRIPTION "The mpegMappingsGroup is unconditionally optional." GROUP mpegSessionsGroup DESCRIPTION "The mpegSessionsGroup is unconditionally optional." GROUP mpegInputProgESGroup DESCRIPTION "This group is optional for devices that only support 'passThrough' sessions, or devices that choose not to decode and store extensive information which is available from other sources, such as video server, encoder, satellite, etc." GROUP mpegOutputProgElemStatsGroup DESCRIPTION "This group is optional for devices that only support'passThrough' sessions." ::= { mpegMIBCompliances 1 } mpegInputGroup OBJECT-GROUP OBJECTS { mpegInputTSType, mpegInputTSConnectionType, mpegInputTSConnection, mpegInputTSActiveConnection, mpegLossOfSignalTimeout, mpegInputTSPsiDetected, mpegInputTSStartTime, mpegInputTSResourceAllocated, mpegInputTSNumPrograms, mpegInputTSRate, mpegInputTSMaxRate, mpegInputTSPatVersion, mpegInputTSCatVersion, mpegInputTSNitPid, mpegInputTSNumEmms, mpegInputTSTSID, mpegInputTSLock, mpegInputUdpOriginationIfIndex, mpegInputUdpOriginationInetAddrType, mpegInputUdpOriginationSrcInetAddr, mpegInputUdpOriginationDestInetAddr, mpegInputUdpOriginationDestPort, mpegInputUdpOriginationActive, mpegInputUdpOriginationPacketsDetected, mpegInputUdpOriginationRank, mpegInputUdpOriginationInputTSIndex, mpegInputProgPmtVersion, mpegInputProgNo, mpegInputProgPmtVersion, mpegInputProgPmtPid, mpegInputProgPcrPid, mpegInputProgEcmPid, mpegInputProgNumElems, mpegInputProgNumEcms, mpegInputProgCaDescr, mpegInputProgScte35Descr, mpegInputProgScte18Descr, mpegInputStatsPcrPackets, mpegInputStatsNonPcrPackets, mpegInputStatsUnexpectedPackets, mpegInputStatsContinuityErrors, mpegInputStatsSyncLossPackets, mpegInputStatsPcrIntervalExceeds, mpegInputStatsPcrJitter, mpegInputStatsMaxPacketJitter } STATUS current DESCRIPTION "The input objects of the MPEG device." ::= { mpegMIBGroups 1 } mpegInputProgESGroup OBJECT-GROUP OBJECTS { mpegProgESScte18Descr, mpegProgESScte35Descr, mpegProgESCaDescr, mpegProgESPID, mpegProgESType } STATUS current DESCRIPTION "This table contains information about the elementary streams in a program. " ::= { mpegMIBGroups 2 } mpegOutputGroup OBJECT-GROUP OBJECTS { mpegInsertPacketListId, mpegInsertPacketImmediateExecution, mpegInsertPacketStartTime, mpegInsertPacketRepeat, mpegInsertPacketContinuousFlag, mpegInsertPacketRate, mpegInsertPacketDeviceIfIndex, mpegOutputStatsDroppedPackets, mpegOutputStatsFifoOverflow, mpegOutputStatsFifoUnderflow, mpegOutputStatsDataRate, mpegOutputStatsAvailableBandwidth, mpegOutputProgNo, mpegOutputProgPmtVersion, mpegOutputProgPmtPid, mpegOutputProgPcrPid, mpegOutputProgEcmPid, mpegOutputProgNumElems, mpegOutputProgNumEcms, mpegOutputProgCaDescr, mpegOutputProgScte35Descr, mpegOutputTSType, mpegOutputTSConnectionType, mpegOutputTSConnection, mpegOutputTSNumPrograms, mpegOutputTSTSID, mpegOutputTSNitPid, mpegOutputTSCaPid, mpegOutputTSCatInsertRate, mpegOutputTSPatInsertRate, mpegOutputProgScte18Descr, mpegOutputTSPmtInsertRate, mpegOutputTSStartTime, mpegOutputUdpDestinationIfIndex, mpegOutputUdpDestinationInetAddrType, mpegOutputUdpDestinationSrcInetAddr, mpegOutputUdpDestinationDestInetAddr, mpegOutputUdpDestinationDestPort, mpegOutputUdpDestinationOutputTSIndex, mpegOutputStatsChannelUtilization, mpegOutputStatsTotalPackets } STATUS current DESCRIPTION "The output objects of the MPEG device." ::= { mpegMIBGroups 3 } mpegOutputProgElemStatsGroup OBJECT-GROUP OBJECTS { mpegOutputProgElemStatsDataRate, mpegOutputProgElemStatsElemType } STATUS current DESCRIPTION "The stats associated with the elementary streams of an MPEG program." ::= { mpegMIBGroups 4 } mpegMappingsGroup OBJECT-GROUP OBJECTS { mpegProgramMappingOutputProgIndex, mpegProgramMappingOutputTSIndex, mpegProgramMappingInputProgIndex, mpegProgramMappingInputTSIndex } STATUS current DESCRIPTION "The group of objects describing program mappings within the Device." ::= { mpegMIBGroups 5 } mpegSessionsGroup OBJECT-GROUP OBJECTS { mpegVideoSessionPhyMappingIndex, mpegVideoSessionPIDRemap, mpegVideoSessionMode, mpegVideoSessionState, mpegVideoSessionProvMethod, mpegVideoSessionEncryptionType, mpegVideoSessionEncryptionInfo, mpegVideoSessionBitRate, mpegVideoSessionID, mpegVideoSessionSelectedInput, mpegVideoSessionSelectedOutput, mpegVideoSessionPtrStatus, mpegInputTSOutputSessionCreateTime } STATUS current DESCRIPTION "The group of objects describing program mappings within the Device." ::= { mpegMIBGroups 6 } END