-- *********************************************** -- PAN-COMMON-MIB.my -- -- MIB for the common MIB objects implemented by all -- Palo Alto devices. -- *********************************************** PAN-COMMON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI -- MODULE-COMPLIANCE, OBJECT-GROUP -- FROM SNMPv2-CONF TEXTUAL-CONVENTION FROM SNMPv2-TC DisplayString, TruthValue, TimeStamp FROM SNMPv2-TC TcChassisType FROM PAN-GLOBAL-TC panModules, panCommonMib FROM PAN-GLOBAL-REG; panCommonMibModule MODULE-IDENTITY LAST-UPDATED "201409040000Z" ORGANIZATION "Palo Alto Networks" CONTACT-INFO " Customer Support Palo Alto Networks 4401 Great America Pkwy Santa Clara, CA 95054-1211 +1 866-898-9087 support at paloaltonetworks dot com" DESCRIPTION " A MIB module containing definitions of managed objects implemented by all Palo Alto Networks' products." REVISION "201409040000Z" DESCRIPTION " Rev 2.3 Added entries for Log Collector." REVISION "201409040000Z" DESCRIPTION " Rev 2.2 Added entries for Wildfire content versions. Added entry for new platform PA 3060." REVISION "201403060000Z" DESCRIPTION " Rev 2.1 Fixed a capitalization error with PanVsysEntry." REVISION "201303010000Z" DESCRIPTION " Rev 2.0 Updated with panGlobalProtect and panVsysTable." REVISION "201102091610Z" DESCRIPTION " Rev 1.0 Initial version of MIB module PAN-COMMON-MIB." ::= { panModules 3 } FloatValue ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-2" STATUS current DESCRIPTION " This data type is used to represent Float values." SYNTAX OCTET STRING (SIZE(0..64)) panCommonConfMib OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for MIB conformance statements." ::= { panCommonMib 1 } panCommonObjs OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common MIB objects." ::= { panCommonMib 2 } panCommonEvents OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common MIB events." ::= { panCommonMib 3 } -- Top level groups panSys OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common system objects." ::= { panCommonObjs 1 } panChassis OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common chassis information." ::= { panCommonObjs 2 } panSession OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common session information." ::= { panCommonObjs 3 } panMgmt OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common Management plane information." ::= { panCommonObjs 4 } panGlobalProtect OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common GlobalProtect information." ::= { panCommonObjs 5 } panLogCollector OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common Log Collector information." ::= { panCommonObjs 6 } panDeviceLogging OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common Device information." ::= { panCommonObjs 7 } panSSLBroker OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree to capture ssl broker statistics." ::= { panCommonObjs 8 } panHACluster OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for HA Cluster monitoring statistics." ::= { panCommonObjs 9 } panWFMonitor OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for Wildfire monitoring statistics." ::= { panCommonObjs 10 } panGlobalCounters OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for common Global counters." ::= { panSys 19 } ---------------------------------------------------------------------- -- System objects panSysSwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Full software version. The first two components of the full version are the major and minor versions. The third component indicates the maintenance release number and the fourth, the build number." ::= { panSys 1 } panSysHwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware version of the unit." ::= { panSys 2 } panSysSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the unit. If not available, an empty string is returned." ::= { panSys 3 } panSysTimeZoneOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The offset in seconds from UTC of the system's time zone. Values are negative for locations west of UTC and positive for locations east of UTC." ::= { panSys 4 } panSysDaylightSaving OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether daylight savings are in currently in effect for the system's time zone." ::= { panSys 5 } panSysVpnClientVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed VPN client package version. If package is not installed, 0.0.0 is returned." ::= { panSys 6 } panSysAppVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed application definition version. If no application definition is found, 0 is returned." ::= { panSys 7 } panSysAvVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed antivirus version. If no antivirus is found, 0 is returned." ::= { panSys 8 } panSysThreatVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed threat definition version. If no threat definition is found, 0 is returned." ::= { panSys 9 } panSysUrlFilteringVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed URL filtering version. If no URL filtering is installed, 0 is returned." ::= { panSys 10 } panSysHAState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current high-availability state." ::= { panSys 11 } panSysHAPeerState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current peer high-availability state." ::= { panSys 12 } panSysHAMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current high-availability mode (disabled, active-passive, or active-active)." ::= { panSys 13 } panSysUrlFilteringDatabase OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current installed URL filtering database (surfcontrol, brightcloud, etc)" ::= { panSys 14 } panSysGlobalProtectClientVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed global-protect client package version. If package is not installed, 0.0.0 is returned." ::= { panSys 15 } panSysOpswatDatafileVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed opswat database version. If package is not installed, 0 is returned." ::= { panSys 16 } panSysWildfireVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed wildfire content version. If no wildfire content is found, 0 is returned." ::= { panSys 17 } panSysWildfirePrivateCloudVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed wildfire private cloud content version. If no wpc is found, 0 is returned." ::= { panSys 18 } panSysAppReleaseDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed application definition release date. If no release date is found, unknown is returned." ::= { panSys 20 } panSysThreatReleaseDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed threat release date. If no release date is found, unknown is returned." ::= { panSys 21 } panSysAvReleaseDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed antivirus release date. If no release date is found, unknown is returned." ::= { panSys 22 } panSysWfReleaseDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Currently installed WildFire release date. If no release date is found, unknown is returned." ::= { panSys 23 } ---------------------------------------------------------------------- -- Chassis panChassisType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis type for this Palo Alto device." ::= { panChassis 1 } panMSeriesMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Series Mode for this Palo Alto device." ::= { panChassis 2 } ---------------------------------------------------------------------- -- Session panSessionUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session table utilization percentage. Values should be between 0 and 100." ::= { panSession 1 } panSessionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of sessions supported." ::= { panSession 2 } panSessionActive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active sessions." ::= { panSession 3 } panSessionActiveTcp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active TCP sessions." ::= { panSession 4 } panSessionActiveUdp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active UDP sessions." ::= { panSession 5 } panSessionActiveICMP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active ICMP sessions." ::= { panSession 6 } panSessionActiveSslProxy OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active SSL proxy sessions." ::= { panSession 7 } panSessionSslProxyUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SSL proxy Session utilization percentage. Values should be between 0 and 100." ::= { panSession 8 } panVsysTable OBJECT-TYPE SYNTAX SEQUENCE OF PanVsysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VSYS table" ::= { panSession 9 } panZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF PanZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for the current active connectionsPerSecond (CPS) values for each zone present." ::= { panSession 10 } panIfTable OBJECT-TYPE SYNTAX SEQUENCE OF PanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for the current active connectionsPerSecond (CPS) values for each interface present." ::= { panSession 11 } panSessionCps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active TCP connections per second." ::= { panSession 12 } ---------------------------------------------------------------------- -- VsysTable panVsysEntry OBJECT-TYPE SYNTAX PanVsysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when the Vsys's are added to the entVsysTable." INDEX { panVsysId } ::= { panVsysTable 1 } PanVsysEntry ::= SEQUENCE { panVsysId Integer32, panVsysName DisplayString, panVsysSessionUtilizationPct Integer32, panVsysActiveSessions Integer32, panVsysMaxSessions Integer32, panVsysActiveTcpCps Integer32, panVsysActiveUdpCps Integer32, panVsysActiveOtherIpCps Integer32 } panVsysId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vsys id" ::= { panVsysEntry 1 } panVsysName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User assigned vsys name (empty string if not available)" ::= { panVsysEntry 2 } panVsysSessionUtilizationPct OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vsys utilization percentage, if session limit is configured. If session limit is not configured, this value is '0'" ::= { panVsysEntry 3 } panVsysActiveSessions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active sessions on this Vsys" ::= { panVsysEntry 4 } panVsysMaxSessions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max sessions on this Vsys, if session limit is configured. If session limit is not configured, this value is '0'" ::= { panVsysEntry 5 } panVsysActiveTcpCps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Tcp Connections per second for thie vSys." ::= { panVsysEntry 6 } panVsysActiveUdpCps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Udp Connections per second for thie vSys." ::= { panVsysEntry 7 } panVsysActiveOtherIpCps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Other IP Connections per second for thie vSys." ::= { panVsysEntry 8 } ---------------------------------------------------------------------- -- Mgmt panMgmtPanoramaConnected OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connection status to Panorama Server (connected, not-connected)" ::= { panMgmt 1 } panMgmtPanorama2Connected OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connection status to Panorama2 Server (connected, not-connected)" ::= { panMgmt 2 } ---------------------------------------------------------------------- -- GlobalProtect panGPGatewayUtilization OBJECT-IDENTITY STATUS current DESCRIPTION "GlobalProtect gateway utilization" ::= { panGlobalProtect 1 } ---------------------------------------------------------------------- -- GlobalProtect gateway utilization panGPGWUtilizationPct OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "GlobalProtect Gateway utilization percentage" ::= { panGPGatewayUtilization 1 } panGPGWUtilizationMaxTunnels OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max tunnels allowed" ::= { panGPGatewayUtilization 2 } panGPGWUtilizationActiveTunnels OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active tunnels" ::= { panGPGatewayUtilization 3 } -------------------------------------------------------------------- -- Device Logging MIB panDeviceLoggingLogRate OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for Device Logging Rate statistics." ::= { panDeviceLogging 1 } panDeviceLoggingLogTypeStatTable OBJECT-TYPE SYNTAX SEQUENCE OF PanDeviceLoggingLogTypeStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for the statistics for different log types on the Device." ::= { panDeviceLogging 2 } panDeviceLoggingLogUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF PanDeviceLoggingLogUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for Log Usage and days retained for different log types on the Device. Log Disk Usage is avaiable as MB (in use)." ::= { panDeviceLogging 3 } panDeviceLoggingExtFwd OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for tracking dropped logs as ther are forwarded from device." ::= { panDeviceLogging 4 } panDeviceLoggingCollectorConnectionTable OBJECT-TYPE SYNTAX SEQUENCE OF PanDeviceLoggingCollectorConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for tracking various log collection entities connected to device." ::= { panDeviceLogging 5 } --------------------------------------------------------------------------- -- panSSLBroker panSSLBrokerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PanSSLBrokerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing ssl broker statistics and status." ::= { panSSLBroker 1 } panSSLBrokerStatsEntry OBJECT-TYPE SYNTAX PanSSLBrokerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of ssl broker statistics and status." INDEX { index } ::= { panSSLBrokerStatsTable 1 } PanSSLBrokerStatsEntry ::= SEQUENCE { index Integer32, chainName DisplayString, avgLatency Integer32, sessionCount Integer32 } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the ssl broker stats entry" ::= { panSSLBrokerStatsEntry 1 } chainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of ssl broker chain object" ::= { panSSLBrokerStatsEntry 2 } avgLatency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average latency value" ::= { panSSLBrokerStatsEntry 3 } sessionCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active sessions" ::= { panSSLBrokerStatsEntry 4 } --------------------------------------------------------------------------- -- panHACluster panHAClusterLocalSessStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PanHAClusterLocalSessStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing HA cluster session data that is local to the firewall." ::= { panHACluster 1 } panHAClusterLocalSessStatsEntry OBJECT-TYPE SYNTAX PanHAClusterLocalSessStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of HA cluster monitoring local statistics." INDEX { index } ::= { panHAClusterLocalSessStatsTable 1 } PanHAClusterLocalSessStatsEntry ::= SEQUENCE { index Integer32, serialNumber DisplayString, cacheCurrentTotal Unsigned32, cacheMax Unsigned32, tableActive Unsigned32, tableMax Unsigned32 } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the HA cluster local stats entry" ::= { panHAClusterLocalSessStatsEntry 1 } serialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the firewall." ::= { panHAClusterLocalSessStatsEntry 2 } cacheCurrentTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of cluster sessions in the firewall's cluster cache. This includes current sessions from all the remote firewalls in the cluster plus the local firewall's current sessions that are sent to the remote firewalls." ::= { panHAClusterLocalSessStatsEntry 3 } cacheMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of sessions the firewall's cluster cache can support." ::= { panHAClusterLocalSessStatsEntry 4 } tableActive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active sessions in the firewall's local table." ::= { panHAClusterLocalSessStatsEntry 5 } tableMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of sessions the firewall's local table can support." ::= { panHAClusterLocalSessStatsEntry 6 } panHAClusterSessStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PanHAClusterSessStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing HA cluster session data learnt from the remote firewalls in the HA cluster." ::= { panHACluster 2 } panHAClusterSessStatsEntry OBJECT-TYPE SYNTAX PanHAClusterSessStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of HA cluster monitoring statistics." INDEX { index } ::= { panHAClusterSessStatsTable 1 } PanHAClusterSessStatsEntry ::= SEQUENCE { index Integer32, serialNumber DisplayString, cacheCurrent Unsigned32, cacheAccumulated Unsigned32, cacheCurrentPromoted Unsigned32, promotedAccumulated Unsigned32 } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the HA cluster session stats entry" ::= { panHAClusterSessStatsEntry 1 } serialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the remote firewall." ::= { panHAClusterSessStatsEntry 2 } cacheCurrent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The numnber of current sessions from the remote firewall." ::= { panHAClusterSessStatsEntry 3 } cacheAccumulated OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accumulated sessions from the remote firewall since local firewall startup." ::= { panHAClusterSessStatsEntry 4 } cacheCurrentPromoted OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current sessions from the remote firewall that have been promoted to the local session table." ::= { panHAClusterSessStatsEntry 5 } promotedAccumulated OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accumulated sessions from the remote firewall that have been promoted to the local session table since local firewall startup." ::= { panHAClusterSessStatsEntry 6 } --------------------------------------------------------------------------- -- panWFMonitor panWFMonitorQStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PanWFMonitorQStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing Wildfire monitoring queue status statistics." ::= { panWFMonitor 1 } panWFMonitorQStatusEntry OBJECT-TYPE SYNTAX PanWFMonitorQStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Wildfire monitoring queue status statistics." INDEX { index } ::= { panWFMonitorQStatusTable 1 } PanWFMonitorQStatusEntry ::= SEQUENCE { index Integer32, name DisplayString, archiveCount Unsigned32, docCount Unsigned32, elinkCount Unsigned32, portExecCount Unsigned32, urlUploadFileCount Unsigned32 } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of Wildfire monitoring queue status entry" ::= { panWFMonitorQStatusEntry 1 } name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Wildfire monitoring queue status entry" ::= { panWFMonitorQStatusEntry 2 } archiveCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring files archived" ::= { panWFMonitorQStatusEntry 3 } docCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring documents" ::= { panWFMonitorQStatusEntry 4 } elinkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring email link dynamic analyses" ::= { panWFMonitorQStatusEntry 5 } portExecCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring portable executables" ::= { panWFMonitorQStatusEntry 6 } urlUploadFileCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring URL upload files" ::= { panWFMonitorQStatusEntry 7 } panWFMonitorArchiveUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF PanWFMonitorArchiveUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing Wildfire monitoring archive utilization statistics." ::= { panWFMonitor 2 } panWFMonitorArchiveUtilizationEntry OBJECT-TYPE SYNTAX PanWFMonitorArchiveUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Wildfire monitoring archive utilization statistics." INDEX { index } ::= { panWFMonitorArchiveUtilizationTable 1 } PanWFMonitorArchiveUtilizationEntry ::= SEQUENCE { index Integer32, name DisplayString, available Unsigned32, inUse Unsigned32, } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of Wildfire monitoring archive utilization entry" ::= { panWFMonitorArchiveUtilizationEntry 1 } name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Wildfire monitoring archive utilization entry" ::= { panWFMonitorArchiveUtilizationEntry 2 } available OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring available archived files" ::= { panWFMonitorArchiveUtilizationEntry 3 } inUse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring archived files in use" ::= { panWFMonitorArchiveUtilizationEntry 4 } panWFMonitorDocUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF PanWFMonitorDocUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing Wildfire monitoring document utilization statistics." ::= { panWFMonitor 3 } panWFMonitorDocUtilizationEntry OBJECT-TYPE SYNTAX PanWFMonitorDocUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Wildfire monitoring document utilization statistics." INDEX { index } ::= { panWFMonitorDocUtilizationTable 1 } PanWFMonitorDocUtilizationEntry ::= SEQUENCE { index Integer32, name DisplayString, available Unsigned32, inUse Unsigned32, } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of Wildfire monitoring document utilization entry" ::= { panWFMonitorDocUtilizationEntry 1 } name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Wildfire monitoring document utilization entry" ::= { panWFMonitorDocUtilizationEntry 2 } available OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring available documents" ::= { panWFMonitorDocUtilizationEntry 3 } inUse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring documents in use" ::= { panWFMonitorDocUtilizationEntry 4 } panWFMonitorElinkUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF PanWFMonitorElinkUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing Wildfire monitoring email link analysis utilization statistics." ::= { panWFMonitor 4 } panWFMonitorElinkUtilizationEntry OBJECT-TYPE SYNTAX PanWFMonitorElinkUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Wildfire monitoring email link analysis utilization statistics." INDEX { index } ::= { panWFMonitorElinkUtilizationTable 1 } PanWFMonitorElinkUtilizationEntry ::= SEQUENCE { index Integer32, name DisplayString, available Unsigned32, inUse Unsigned32, } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of Wildfire monitoring email link analysis utilization entry" ::= { panWFMonitorElinkUtilizationEntry 1 } name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Wildfire monitoring email link analysis utilization entry" ::= { panWFMonitorElinkUtilizationEntry 2 } available OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring available email link analyses" ::= { panWFMonitorElinkUtilizationEntry 3 } inUse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring email link dynamic analyses in use" ::= { panWFMonitorElinkUtilizationEntry 4 } panWFMonitorPortableExecUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF PanWFMonitorPortableExecUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub-tree for capturing Wildfire monitoring portable executable utilization statistics." ::= { panWFMonitor 5 } panWFMonitorPortableExecUtilizationEntry OBJECT-TYPE SYNTAX PanWFMonitorPortableExecUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Wildfire monitoring portable executable utilization statistics." INDEX { index } ::= { panWFMonitorPortableExecUtilizationTable 1 } PanWFMonitorPortableExecUtilizationEntry ::= SEQUENCE { index Integer32, name DisplayString, available Unsigned32, inUse Unsigned32, } index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of Wildfire monitoring portable executable utilization entry" ::= { panWFMonitorPortableExecUtilizationEntry 1 } name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of Wildfire monitoring portable executalbe utilization entry" ::= { panWFMonitorPortableExecUtilizationEntry 2 } available OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring available portable executables" ::= { panWFMonitorPortableExecUtilizationEntry 3 } inUse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Wildfire monitoring portable executables in use" ::= { panWFMonitorPortableExecUtilizationEntry 4 } --------------------------------------------------------------------------- -- panDeviceLoggingLogRate panDeviceIncomingLogRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The incoming rate in logs/s on the Device." ::= { panDeviceLoggingLogRate 1 } panDeviceWriteLogRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The write rate in logs/s on the Device." ::= { panDeviceLoggingLogRate 2 } --------------------------------------------------------------------------- -- panDeviceLoggingLogTypeStatTable panDeviceLoggingLogTypeStatEntry OBJECT-TYPE SYNTAX PanDeviceLoggingLogTypeStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when the panLcLogUsage are added to the panLcLogUsageTable." INDEX { IMPLIED panDeviceLoggingDeviceIndex, panDeviceLoggingDevice } ::= { panDeviceLoggingLogTypeStatTable 1 } PanDeviceLoggingLogTypeStatEntry ::= SEQUENCE { panDeviceLoggingDevice DisplayString, panDeviceLoggingDeviceIndex Integer32, panDeviceLoggingLogType DisplayString, panDeviceLoggingLogLastLogCreated TimeStamp, panDeviceLoggingLogLastLogFwded TimeStamp, panDeviceLoggingLogLastSeqNumberFwded Counter64, panDeviceLoggingLogLastSeqNumberAck Counter64, panDeviceLoggingLogTotalLogsFwded Counter64 } panDeviceLoggingDevice OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device Information (Name or Serial Number)." ::= { panDeviceLoggingLogTypeStatEntry 1 } panDeviceLoggingDeviceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index as mentioned in panDeviceLoggingCollectorConnection table." ::= { panDeviceLoggingLogTypeStatEntry 2 } panDeviceLoggingLogType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Type of log." ::= { panDeviceLoggingLogTypeStatEntry 3 } panDeviceLoggingLogLastLogCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the last log creation." ::= { panDeviceLoggingLogTypeStatEntry 4 } panDeviceLoggingLogLastLogFwded OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Time at which last log was forwarded." ::= { panDeviceLoggingLogTypeStatEntry 5 } panDeviceLoggingLogLastSeqNumberFwded OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sequence number of the last log that was forwarded." ::= { panDeviceLoggingLogTypeStatEntry 6 } panDeviceLoggingLogLastSeqNumberAck OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sequence number of the last log that was acknowledged." ::= { panDeviceLoggingLogTypeStatEntry 7 } panDeviceLoggingLogTotalLogsFwded OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of logs forwarded." ::= { panDeviceLoggingLogTypeStatEntry 8 } -------------------------------------------------------------------- -- PanDeviceLoggingLogUsageEntry panDeviceLoggingLogUsageEntry OBJECT-TYPE SYNTAX PanDeviceLoggingLogUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when the panDeviceLoggingLogUsage are added to the panDeviceLoggingLogUsageTable." INDEX { panDeviceLoggingLogUsageLogType } ::= { panDeviceLoggingLogUsageTable 1 } PanDeviceLoggingLogUsageEntry ::= SEQUENCE { panDeviceLoggingLogUsageLogType DisplayString, panDeviceLoggingDiskUsageDiskSpace FloatValue, panDeviceLoggingDiskUsageRetention Unsigned32, panDeviceLoggingDiskQuotaPct FloatValue, panDeviceLoggingDiskQuota FloatValue } panDeviceLoggingLogUsageLogType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Log type for Device. " ::= { panDeviceLoggingLogUsageEntry 1 } panDeviceLoggingDiskUsageDiskSpace OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Usage (MB) for particular log type for Device. " ::= { panDeviceLoggingLogUsageEntry 2 } panDeviceLoggingDiskUsageRetention OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Rentention for particular log type for Device. " ::= { panDeviceLoggingLogUsageEntry 3 } panDeviceLoggingDiskQuotaPct OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Quota percentage for particular log type for Device. " ::= { panDeviceLoggingLogUsageEntry 4 } panDeviceLoggingDiskQuota OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Quota for particular log type for Device. " ::= { panDeviceLoggingLogUsageEntry 5 } ---------------------------------------------------------------------- -- panDeviceLoggingExtFwd panDeviceLoggingExtFwdCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total count for logs forwarded." ::= { panDeviceLoggingExtFwd 1 } panDeviceLoggingExtFwdQueueDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Counter for logs dropped due to queue being full." ::= { panDeviceLoggingExtFwd 2 } panDeviceLoggingExtFwdStatsSendErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Counter for logs discarded due to sending error." ::= { panDeviceLoggingExtFwd 3 } panDeviceLoggingExtFwdStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PanDeviceLoggingExtFwdStatsEntry MAX-ACCESS read-only STATUS current DESCRIPTION "This table shows the status of logs as they are forwarded via syslog, Traps, email and http/https from this Device." ::= { panDeviceLoggingExtFwd 4 } -------------------------------------------------------------------- -- panDeviceLoggingExtFwdStatsTable panDeviceLoggingExtFwdStatsEntry OBJECT-TYPE SYNTAX PanDeviceLoggingExtFwdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when panDeviceLoggingExtFwdStats are added to panDeviceLoggingExtFwdStatsTable." INDEX { panDeviceLoggingExtFwdStatsTableType } ::= { panDeviceLoggingExtFwdStatsTable 1 } PanDeviceLoggingExtFwdStatsEntry ::= SEQUENCE { panDeviceLoggingExtFwdStatsTableType DisplayString, panDeviceLoggingExtFwdStatsTableEnqueueCount Counter64, panDeviceLoggingExtFwdStatsTableSendCount Counter64, panDeviceLoggingExtFwdStatsTableDropCount Counter64, panDeviceLoggingExtFwdStatsTableQueueDepth Counter64, panDeviceLoggingExtFwdStatsTable1minAvgSendRate Unsigned32 } panDeviceLoggingExtFwdStatsTableType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of method used to forward logs." ::= { panDeviceLoggingExtFwdStatsEntry 1 } panDeviceLoggingExtFwdStatsTableEnqueueCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of logs enqueued." ::= { panDeviceLoggingExtFwdStatsEntry 2 } panDeviceLoggingExtFwdStatsTableSendCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of logs sent." ::= { panDeviceLoggingExtFwdStatsEntry 3 } panDeviceLoggingExtFwdStatsTableDropCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of logs dropped." ::= { panDeviceLoggingExtFwdStatsEntry 4 } panDeviceLoggingExtFwdStatsTableQueueDepth OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for depth of queue." ::= { panDeviceLoggingExtFwdStatsEntry 5 } panDeviceLoggingExtFwdStatsTable1minAvgSendRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for average send rate over 1 minute interval." ::= { panDeviceLoggingExtFwdStatsEntry 6 } ------------------------------------------------------------------- -- panDeviceLoggingCollectorConnectionTable panDeviceLoggingCollectorConnectionEntry OBJECT-TYPE SYNTAX PanDeviceLoggingCollectorConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when the panDeviceLogging are added to the panDeviceLoggingCollectorConnectionTable." INDEX { panDeviceLoggingCollectorConnectionIP } ::= { panDeviceLoggingCollectorConnectionTable 1 } PanDeviceLoggingCollectorConnectionEntry ::= SEQUENCE { panDeviceLoggingCollectorConnectionType DisplayString, panDeviceLoggingCollectorConnectionIP DisplayString, panDeviceLoggingCollectorConnectionHostname DisplayString, panDeviceLoggingCollectorConnectionStatus DisplayString } panDeviceLoggingCollectorConnectionType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Type of log collection entity (CMS/LC)." ::= { panDeviceLoggingCollectorConnectionEntry 1 } panDeviceLoggingCollectorConnectionIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP of log collection entity (CMS/LC) for non-7K and Gryphon. Will display connection ID for 7K and Gryphon." ::= { panDeviceLoggingCollectorConnectionEntry 2 } panDeviceLoggingCollectorConnectionHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Hostname of log collection entity (CMS/LC)." ::= { panDeviceLoggingCollectorConnectionEntry 3 } panDeviceLoggingCollectorConnectionStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Connection status of log collection entity (CMS/LC)." ::= { panDeviceLoggingCollectorConnectionEntry 4 } ---------------------------------------------------------------------- -- LogCollector panLcStat OBJECT-IDENTITY STATUS current DESCRIPTION " Sub-tree for the Log collection statistics." ::= { panLogCollector 1 } ---------------------------------------------------------------------- -- LogCollector Stats panLcLogRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The write rate in logs/s on the Log Collection" ::= { panLcStat 1 } panLcLogDuration OBJECT-IDENTITY STATUS deprecated DESCRIPTION " Sub-tree for the Log Duration on the Log Collector. Log Duration is Expressed in Days of storage." ::= { panLcStat 2 } panLcDiskUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF PanLcDiskUsageEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION " Sub-tree for the Log Disk Usage on the Log Collector. Log Disk Usage is available as MB in use." ::= { panLcStat 3 } panLcLogUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF PanLcLogUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for the Log Usage and data retention on the Log Collector(non localDB). Log Disk Usage is available as MB in use." ::= { panLcStat 4 } panLocalLogUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF PanLocalLogUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for the Log Usage and data retention on the Log Collector(localDB). Log Disk Usage is available as MB in use." ::= { panLcStat 5 } panLcDiskIOPSTable OBJECT-TYPE SYNTAX SEQUENCE OF PanLcDiskIOPSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sub-tree for Log Disk I/O throughput on the Log Collector and Panorama." ::= { panLcStat 6 } panLcLogDurationTraffic OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the traffic logs on the Log Collector" ::= { panLcLogDuration 1 } panLcLogDurationConfig OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the config logs on the Log Collector" ::= { panLcLogDuration 2 } panLcLogDurationSystem OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the system logs on the Log Collector" ::= { panLcLogDuration 3 } panLcLogDurationThreat OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the threat logs on the Log Collector" ::= { panLcLogDuration 4 } panLcLogDurationAppstat OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the appstat logs on the Log Collector" ::= { panLcLogDuration 5 } panLcLogDurationTrsum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the trsum logs on the Log Collector" ::= { panLcLogDuration 6 } panLcLogDurationThsum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the thsum logs on the Log Collector" ::= { panLcLogDuration 7 } panLcLogDurationEvent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the event logs on the Log Collector" ::= { panLcLogDuration 8 } panLcLogDurationAlarm OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the alarm logs on the Log Collector" ::= { panLcLogDuration 9 } panLcLogDurationHipmatch OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the hipmatch logs on the Log Collector" ::= { panLcLogDuration 10 } panLcLogDurationUserid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log duration (in days) for the userid logs on the Log Collector" ::= { panLcLogDuration 11 } panLcDiskUsageEntry OBJECT-TYPE SYNTAX PanLcDiskUsageEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Entries are created when the panLcDiskUsage are added to the panLcDiskUsageTable." INDEX { panLcDiskUsageId } ::= { panLcDiskUsageTable 1 } PanLcDiskUsageEntry ::= SEQUENCE { panLcDiskUsageId Integer32, panLcDiskUsage Unsigned32 } panLocalLogUsageEntry OBJECT-TYPE SYNTAX PanLocalLogUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when the panLocalLogUsage are added to the panLocalLogUsageTable." INDEX { panLcLogType } ::= { panLocalLogUsageTable 1 } PanLocalLogUsageEntry ::= SEQUENCE { panLocalLogType DisplayString, panLocalDiskUsageDiskSpace FloatValue, panLocalDiskUsageRetention Unsigned32, panLocalDiskQuota FloatValue, panLocalDiskQuotaPct FloatValue } panLocalLogType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Log type for Log Collector. " ::= { panLocalLogUsageEntry 1 } panLocalDiskUsageDiskSpace OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Usage (in MB) for particular log type for Log Collector. " ::= { panLocalLogUsageEntry 2 } panLocalDiskUsageRetention OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Rentention for particular log type for Log Collector. " ::= { panLocalLogUsageEntry 3 } panLocalDiskQuota OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Quota (in MB) for particular log type for Log Collector. " ::= { panLocalLogUsageEntry 4 } panLocalDiskQuotaPct OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Quota Percentage for particular log type for Log Collector. " ::= { panLocalLogUsageEntry 5 } panLcDiskIOPSEntry OBJECT-TYPE SYNTAX PanLcDiskIOPSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when panLcDiskIOPSEntry are added to the panLcDiskIOPSTable." INDEX { panLcDiskIOPSId } ::= { panLcDiskIOPSTable 1 } PanLcDiskIOPSEntry ::= SEQUENCE { panLcDiskIOPSId DisplayString, panLcDiskIORead5min Counter64, panLcDiskIOWrite5min Counter64 } panLcDiskIOPSId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk number for Log Collector or Panorama. " ::= { panLcDiskIOPSEntry 1 } panLcDiskIORead5min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk read rate over a span of 5 minute interval." ::= { panLcDiskIOPSEntry 2 } panLcDiskIOWrite5min OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk write rate over a span of 5 minute interval." ::= { panLcDiskIOPSEntry 3 } panLcLogUsageEntry OBJECT-TYPE SYNTAX PanLcLogUsageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when the panLcLogUsage are added to the panLcLogUsageTable." INDEX { panLcLogType } ::= { panLcLogUsageTable 1 } PanLcLogUsageEntry ::= SEQUENCE { panLcLogType DisplayString, panLcDiskUsageDiskSpacePct FloatValue, panLcDiskUsageRetention Unsigned32, panLcDiskQuotaPct FloatValue } panLcLogType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Log type for Log Collector. " ::= { panLcLogUsageEntry 1 } panLcDiskUsageDiskSpacePct OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Usage Percentage for particular log type for Log Collector aggregated over all disks. " ::= { panLcLogUsageEntry 2 } panLcDiskUsageRetention OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Rentention for particular log type for Log Collector. " ::= { panLcLogUsageEntry 3 } panLcDiskQuotaPct OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Quota Percentage for particular log type for Log Collector aggregated over all disks. " ::= { panLcLogUsageEntry 4 } panLcDiskUsageId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log disk id" ::= { panLcDiskUsageEntry 1 } panLcDiskUsage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Log disk usage on the Log Collector" ::= { panLcDiskUsageEntry 2 } panLcIsRedundancyMember OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True value indicates this Log Collector is part of a Collector Group with Redundancy is enabled" ::= { panLogCollector 2 } panLcLogFwdStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PanLcLogFwdStatsEntry MAX-ACCESS read-only STATUS current DESCRIPTION "This table shows the status of logs as they are forwarded via syslog, Traps, email and http/https from this Log Collector." ::= { panLogCollector 3 } ------------------------------------------------------------------ -- panLcLogFwdStatsTable panLcLogFwdStatsEntry OBJECT-TYPE SYNTAX PanLcLogFwdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when panLcLogFwdStats are added to panLcLogFwdStatsTable." INDEX { panLcLogFwdStatsTableType } ::= { panLcLogFwdStatsTable 1 } PanLcLogFwdStatsEntry ::= SEQUENCE { panLcLogFwdStatsTableType DisplayString, panLcLogFwdStatsTableEnqueueCount Counter64, panLcLogFwdStatsTableSendCount Counter64, panLcLogFwdStatsTableDropCount Counter64, panLcLogFwdStatsTableQueueDepth Counter64 } panLcLogFwdStatsTableType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of method used to forward logs." ::= { panLcLogFwdStatsEntry 1 } panLcLogFwdStatsTableEnqueueCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of logs enqueued." ::= { panLcLogFwdStatsEntry 2 } panLcLogFwdStatsTableSendCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of logs sent." ::= { panLcLogFwdStatsEntry 3 } panLcLogFwdStatsTableDropCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of logs dropped." ::= { panLcLogFwdStatsEntry 4 } panLcLogFwdStatsTableQueueDepth OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for depth of queue." ::= { panLcLogFwdStatsEntry 5 } -- panLcLoggingConnectedDeviceTable panLcLoggingConnectedDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF PanLcLoggingConnectedDeviceEntry MAX-ACCESS read-only STATUS current DESCRIPTION "This table shows the details of all devices logging to this Log Collector." ::= { panLogCollector 4 } panLcLoggingConnectedDeviceEntry OBJECT-TYPE SYNTAX PanLcLoggingConnectedDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when panLcLoggingConnectedDevice are added to panLcLoggingConnectedDeviceTable." INDEX { panLcLoggingConnectedDeviceConnectionId } ::= { panLcLoggingConnectedDeviceTable 1 } PanLcLoggingConnectedDeviceEntry ::= SEQUENCE { panLcLoggingConnectedDeviceName DisplayString, panLcLoggingConnectedDeviceConnectionId DisplayString, panLcLoggingConnectedIdLogRate Unsigned32 } panLcLoggingConnectedDeviceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the device being polled." ::= { panLcLoggingConnectedDeviceEntry 1 } panLcLoggingConnectedDeviceConnectionId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Connection id of the device being polled." ::= { panLcLoggingConnectedDeviceEntry 2 } panLcLoggingConnectedIdLogRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Logging rate for the connection." ::= { panLcLoggingConnectedDeviceEntry 3 } -- panLcLoggingDeviceTable panLcLoggingDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF PanLcLoggingDeviceEntry MAX-ACCESS read-only STATUS current DESCRIPTION "This table shows the details of logs forwarded by devices logging to this Log Collector." ::= { panLogCollector 5 } panLcLoggingDeviceEntry OBJECT-TYPE SYNTAX PanLcLoggingDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when panLcLoggingDevice are added to panLcLoggingDeviceTable." INDEX { panLcLoggingDeviceConnectionId, panLcLoggingLogType } ::= { panLcLoggingDeviceTable 1 } PanLcLoggingDeviceEntry ::= SEQUENCE { panLcLoggingDeviceConnectionId DisplayString, panLcLoggingLogType DisplayString, panLcLogTypeLastLogRecd TimeStamp, panLcLogTypeLastSeqNumRecd Counter64, panLcLogTypeLastLogGen TimeStamp } panLcLoggingDeviceConnectionId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Connection id of the device being polled." ::= { panLcLoggingDeviceEntry 1 } panLcLoggingLogType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Log Type of the log being polled." ::= { panLcLoggingDeviceEntry 2 } panLcLogTypeLastLogRecd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Time at which the last log was received." ::= { panLcLoggingDeviceEntry 3 } panLcLogTypeLastSeqNumRecd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Last sequence number received for a type of log." ::= { panLcLoggingDeviceEntry 4 } panLcLogTypeLastLogGen OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Time at which the last log was generated." ::= { panLcLoggingDeviceEntry 5 } ---------------------------------------------------------------------- -- Events panCommonEventObjs OBJECT-IDENTITY STATUS current DESCRIPTION " Branch for objects meant only to be sent in event varbinds." ::= { panCommonEvents 1 } panCommonEventEvents OBJECT-IDENTITY STATUS current DESCRIPTION " Branch for the events themselves." ::= { panCommonEvents 2 } panCommonEventEventsV2 OBJECT-IDENTITY STATUS current DESCRIPTION " Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902)." ::= { panCommonEventEvents 0 } -- Objects sent only in events panCommonEventDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "String that provides a textual description of the event." ::= { panCommonEventObjs 1 } -- Event descriptions panCommonEventLog NOTIFICATION-TYPE OBJECTS { panCommonEventDescr } STATUS current DESCRIPTION "A config/system/firewall/threat log" ::= { panCommonEventEventsV2 1 } ---------------------------------------------------------------------- -- GlobalCounters panAhoSw OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total usage of software for AHO" ::= { panGlobalCounters 1 } panDfaSw OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of dfa match using software" ::= { panGlobalCounters 2 } panFlowHostServiceAllow OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Device management session allowed" ::= { panGlobalCounters 3 } panHaPathmonSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "HA path-monitoring packets sent" ::= { panGlobalCounters 4 } panAhoFpga OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total requests to FPGA for AHO" ::= { panGlobalCounters 5 } panDfaFpga OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total requests to FPGA for DFA" ::= { panGlobalCounters 6 } panFpgaPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The packets held because of requests to FPGA" ::= { panGlobalCounters 7 } panGlobalCountersDOSCounters OBJECT-IDENTITY STATUS current DESCRIPTION "Sub-tree for Global DOS counters" ::= { panGlobalCounters 8 } panGlobalCountersDropCounters OBJECT-IDENTITY STATUS current DESCRIPTION "Sub-tree for Global Drop counters" ::= { panGlobalCounters 9 } panGlobalCountersIPFragmentationCounters OBJECT-IDENTITY STATUS current DESCRIPTION "Sub-tree for Global IPFragmentation counters" ::= { panGlobalCounters 10 } panGlobalCountersTCPState OBJECT-IDENTITY STATUS current DESCRIPTION "Sub-tree for Global TCPState counters" ::= { panGlobalCounters 11 } panGlobalCountersTunnelInspect OBJECT-IDENTITY STATUS current DESCRIPTION "Sub-tree for Global Tunnel (GRE, IPSEC and GTP) counters" ::= { panGlobalCounters 12 } ---------------------------------------------------------------------- -- Global DOS Counters panFlowDosAgMaxSessLimit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session limit reached for aggregate profile, drop session" ::= { panGlobalCountersDOSCounters 1 } panFlowDosBlkNumEntries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in DOS block table" ::= { panGlobalCountersDOSCounters 2 } panFlowDosClMaxSessLimit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session limit reached for classified profile, drop session" ::= { panGlobalCountersDOSCounters 3 } panFlowDosClSyncookieAckErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP SYN cookies: Invalid ACKs received, classified profile" ::= { panGlobalCountersDOSCounters 4 } panFlowDosClSyncookieAckRcv OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP SYN cookies: ACKs to cookies received, classified profile" ::= { panGlobalCountersDOSCounters 5 } panFlowDosClSyncookieBlkDur OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Flagged for blocking and under block duration for cl" ::= { panGlobalCountersDOSCounters 6 } panFlowDosClSyncookieMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet dropped: SYN cookies maximum threshold reached, classified pro" ::= { panGlobalCountersDOSCounters 7 } panFlowDosClSyncookieSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP SYN cookies: cookies sent, classified profile" ::= { panGlobalCountersDOSCounters 8 } panFlowMeterVsysThrottle OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session metering: sessions throttled by vsys configuration" ::= { panGlobalCountersDOSCounters 9 } panFlowPolicyDeny OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session setup: denied by policy" ::= { panGlobalCountersDOSCounters 10 } panFlowPolicyNat OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session setup: source NAT IP/port allocation error" ::= { panGlobalCountersDOSCounters 11 } panFlowScanDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session setup: denied by scan detection" ::= { panGlobalCountersDOSCounters 12 } panFlowDosDropIpBlocked OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Flagged for blocking and under block duration by oth" ::= { panGlobalCountersDOSCounters 13 } panFlowDosRedIcmp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Zone protection protocol 'icmp' RED" ::= { panGlobalCountersDOSCounters 14 } panFlowDosRedIcmp6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Zone protection protocol 'icmpv6' RED" ::= { panGlobalCountersDOSCounters 15 } panFlowDosRedIp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Zone protection protocol 'other-ip' RED" ::= { panGlobalCountersDOSCounters 16 } panFlowDosRedTcp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Zone protection protocol 'tcp-syn' RED" ::= { panGlobalCountersDOSCounters 17 } panFlowDosRedUdp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Zone protection protocol 'udp' RED" ::= { panGlobalCountersDOSCounters 18 } panFlowDosRuleAgBlkDur OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Flagged for blocking and under block duration for ag" ::= { panGlobalCountersDOSCounters 19 } panFlowDosRuleAgRedAct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Activate aggregate RED threshold reached, random ear" ::= { panGlobalCountersDOSCounters 20 } panFlowDosRuleAgRedMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Maximal aggregate RED threshold reached" ::= { panGlobalCountersDOSCounters 21 } panFlowDosRuleDeny OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Denied action by DoS policy" ::= { panGlobalCountersDOSCounters 22 } panFlowDosRuleDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Rate limited or IP blocked" ::= { panGlobalCountersDOSCounters 23 } panFlowDosRuleDropAggr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: due to aggregate rate limiting" ::= { panGlobalCountersDOSCounters 24 } panFlowDosRuleDropClBlkDur OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Flagged for blocking and under block duration for cl" ::= { panGlobalCountersDOSCounters 25 } panFlowDosRuleDropClRedAct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Activate classified RED threshold reached, random ea" ::= { panGlobalCountersDOSCounters 26 } panFlowDosRuleDropClRedMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Maximal classified RED threshold reached" ::= { panGlobalCountersDOSCounters 27 } panFlowDosRuleDropClassified OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: due to classified rate limiting" ::= { panGlobalCountersDOSCounters 28 } panFlowDosSyncookieBlkDur OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Flagged for blocking and under block duration for ag" ::= { panGlobalCountersDOSCounters 29 } panFlowDosSyncookieMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet dropped: SYN cookies maximum threshold reached, aggregate prof" ::= { panGlobalCountersDOSCounters 30 } panFlowDosZoneRedAct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Activate zone RED threshold reached, random early dr" ::= { panGlobalCountersDOSCounters 31 } panFlowDosZoneRedMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: Maximal zone RED threshold reached" ::= { panGlobalCountersDOSCounters 32 } panFlowDosBlkSwEntries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in DOS Software block table" ::= { panGlobalCountersDOSCounters 33 } panFlowDosBlkHwEntries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in DOS Hardware block table" ::= { panGlobalCountersDOSCounters 34 } panFlowDosSyncookieNotTcpSyn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP SYN cookies:TCP SYN cookie not SYN" ::= { panGlobalCountersDOSCounters 35 } panFlowDosSyncookieNotTcpSynAck OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP SYN cookies:TCP SYN cookie not SYN-ACK" ::= { panGlobalCountersDOSCounters 36 } panFlowDosPfIpspoof OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-ip-spoof'" ::= { panGlobalCountersDOSCounters 37 } panFlowDosPfIpfrag OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-ip-frag'" ::= { panGlobalCountersDOSCounters 38 } panFlowDosPfPing0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-icmp-ping-zero-id'" ::= { panGlobalCountersDOSCounters 39 } panFlowDosPfIcmpfrag OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-icmp-frag'" ::= { panGlobalCountersDOSCounters 40 } panFlowDosPfIcmplpkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-icmp-large-packet'" ::= { panGlobalCountersDOSCounters 41 } panFlowDosPfIcmperr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-icmp-error'" ::= { panGlobalCountersDOSCounters 42 } panFlowDosPfNoreplyttl OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'suppress-icmp-timeexceeded'" ::= { panGlobalCountersDOSCounters 43 } panFlowDosPfNoreplyneedfrag OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'suppress-icmp-needfrag'" ::= { panGlobalCountersDOSCounters 44 } panFlowDosPfStrictsource OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-strict-source-routing'" ::= { panGlobalCountersDOSCounters 45 } panFlowDosPfLoosesource OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-loose-source-routing'" ::= { panGlobalCountersDOSCounters 46 } panFlowDosPfTimestamp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-timestamp'" ::= { panGlobalCountersDOSCounters 47 } panFlowDosPfRecordroute OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-record-route'" ::= { panGlobalCountersDOSCounters 48 } panFlowDosPfSecurity OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-security'" ::= { panGlobalCountersDOSCounters 49 } panFlowDosPfSatnetid OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-stream-id'" ::= { panGlobalCountersDOSCounters 50 } panFlowDosPfUnknown OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-unknown-option'" ::= { panGlobalCountersDOSCounters 51 } panFlowDosPfBadoption OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-malformed-option'" ::= { panGlobalCountersDOSCounters 52 } panFlowDosPfTcpoverlappingmismatch OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-overlapping-tcp-segment-mismatch'" ::= { panGlobalCountersDOSCounters 53 } panFlowDosPfStrictip OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'strict-ip-check'" ::= { panGlobalCountersDOSCounters 54 } panFlowDosPfTcpsplithandshake OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-tcp-split-handshake'" ::= { panGlobalCountersDOSCounters 55 } panFlowDosPfTcpsyndata OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-tcp-syn-with-data'" ::= { panGlobalCountersDOSCounters 56 } panFlowDosPfTcpsynackdata OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'discard-tcp-synack-with-data'" ::= { panGlobalCountersDOSCounters 57 } panFlowDosIp6Route0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-header-0'" ::= { panGlobalCountersDOSCounters 58 } panFlowDosIp6Route1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-header-1'" ::= { panGlobalCountersDOSCounters 59 } panFlowDosIp6Route3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-header-3'" ::= { panGlobalCountersDOSCounters 60 } panFlowDosIp6Route4to252 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-header-4-252'" ::= { panGlobalCountersDOSCounters 61 } panFlowDosIp6Route253 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-header-253'" ::= { panGlobalCountersDOSCounters 62 } panFlowDosIp6Route254 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-header-254'" ::= { panGlobalCountersDOSCounters 63 } panFlowDosIp6Route255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-header-255'" ::= { panGlobalCountersDOSCounters 64 } panFlowDosIp6Ip4cmpt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'ipv4-compatible-address'" ::= { panGlobalCountersDOSCounters 65 } panFlowDosIp6Acast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'anycast-source'" ::= { panGlobalCountersDOSCounters 66 } panFlowDosIp6OptionsInvalidIPv6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'options-invalid-ipv6-discard'" ::= { panGlobalCountersDOSCounters 67 } panFlowDosIp6Icmpv6ErrorInvalid OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'icmpv6-too-big-small-mtu-discard'" ::= { panGlobalCountersDOSCounters 68 } panFlowDosIp6NeedlessIpv6FragHdr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'needless-fragment-hdr'" ::= { panGlobalCountersDOSCounters 69 } panFlowDosIp6RsvdSet OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'reserved-field-set-discard'" ::= { panGlobalCountersDOSCounters 70 } panFlowDosIPv6ExtHdrHopByHop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'hop-by-hop-hdr'" ::= { panGlobalCountersDOSCounters 71 } panFlowDosip6IPv6ExtHdrRouting OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'routing-hdr'" ::= { panGlobalCountersDOSCounters 72 } panFlowDosIp6IPv6ExtHdrDestOpt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Zone protection option 'dest-option-hdr'" ::= { panGlobalCountersDOSCounters 73 } panFlowDosPbpDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped:Dropped by packet buffer protection RED" ::= { panGlobalCountersDOSCounters 74 } panFlowDosCurrSessIncrFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Unable to increment current session count on session create" ::= { panGlobalCountersDOSCounters 75 } panFlowDosCurrSessDecrFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Unable to decrement current session count on session delete" ::= { panGlobalCountersDOSCounters 76 } ------------------------------------------------------------------------------------------------------- -- Pan Global Drop Counters panFlowFwdL3TtlZero OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets dropped: IP TTL reaches zero" ::= { panGlobalCountersDropCounters 1 } panFlowMeterHostThrottle OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session metering: sessions throttled by management session threshold" ::= { panGlobalCountersDropCounters 2 } panFlowHostServiceDeny OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Device management session denied" ::= { panGlobalCountersDropCounters 3 } panFlowHostServiceUnknown OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session discarded: unknown application to control plane" ::= { panGlobalCountersDropCounters 4 } panPktAllocFailure OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet allocation error" ::= { panGlobalCountersDropCounters 5 } panPktAllocFailureCos OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet allocation error due to QoS control" ::= { panGlobalCountersDropCounters 6 } panSessionDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Session set to discard by security policy check" ::= { panGlobalCountersDropCounters 7 } ------------------------------------------------------------------------------------------------------ -- Pan Global IPFragmentation Counters panFlowIpfragFragErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet dropped: IP fragmentation error" ::= { panGlobalCountersIPFragmentationCounters 1 } panFlowIpfragRecv OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "IP fragments received" ::= { panGlobalCountersIPFragmentationCounters 2 } ------------------------------------------------------------------------------------------------------ -- Pan Global TCP State Counters panTcpAllocWqeFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "wqe allocation failure in tcp" ::= { panGlobalCountersTCPState 1 } panTcpDeny OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "session denied because of failure in tcp reassembly" ::= { panGlobalCountersTCPState 2 } panTcpDropOutOfWnd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "out-of-window packets dropped" ::= { panGlobalCountersTCPState 3 } panTcpDropPacket OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "packets dropped because of failure in tcp reassembly" ::= { panGlobalCountersTCPState 4 } panFlowActionClose OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP sessions closed via injecting RST" ::= { panGlobalCountersTCPState 5 } panFlowActionReset OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP clients reset via responding RST" ::= { panGlobalCountersTCPState 6 } panFlowTcpNonSyn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Non-SYN TCP packets without session match" ::= { panGlobalCountersTCPState 7 } panTcpExceedSegLimit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "packets dropped due to the limitation on global tcp out-of-order pack" ::= { panGlobalCountersTCPState 8 } ------------------------------------------------------------------------------------------------------ -- Pan Global Tunnel State Counters panFlowTciGreDecapSuccess OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total GRE sessions tunnel inspected" ::= { panGlobalCountersTunnelInspect 1 } panFlowTciGreDecapFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total GRE sessions for failed tunnel inspected" ::= { panGlobalCountersTunnelInspect 2 } panFlowTciGreDecapUnknown OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total unknown tunnel inspection packets in GRE tunnel [passed|dropped]" ::= { panGlobalCountersTunnelInspect 3 } panFlowTciIpsecDecapSuccess OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Ipsec sessions tunnel inspected" ::= { panGlobalCountersTunnelInspect 4 } panFlowTciIpsecDecapFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total IPSEC sessions for failed tunnel inspected" ::= { panGlobalCountersTunnelInspect 5 } panFlowTciIpsecDecapUnknown OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total unknown tunnel inspection packets in IPSEC tunnel [passed|dropped]" ::= { panGlobalCountersTunnelInspect 6 } panFlowTciGtpDecapSuccess OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total GTP sessions tunnel inspected" ::= { panGlobalCountersTunnelInspect 7 } panFlowTciGtpDecapFailed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total GTP sessions for failed tunnel inspected" ::= { panGlobalCountersTunnelInspect 8 } panFlowTciGtpDecapUnknown OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total unknown tunnel inspection packets in GTP tunnel[passed|dropped]" ::= { panGlobalCountersTunnelInspect 9 } --------------------------------------------------------------- -- panIfTable panIfEntry OBJECT-TYPE SYNTAX PanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when panIfCPS are added to the panIfCPSTable." INDEX { ifIndex } ::= { panIfTable 1 } PanIfEntry ::= SEQUENCE { ifIndex Unsigned32, ifDescr DisplayString, panIfActiveTcpCps Unsigned32, panIfActiveUdpCps Unsigned32, panIfActiveOtherIpCps Unsigned32 } ifIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the interface" ::= { panIfEntry 1 } ifDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description (name) of the interface" ::= { panIfEntry 2 } panIfActiveTcpCps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active TCP connections per second for this interface." ::= { panIfEntry 3 } panIfActiveUdpCps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active UDP connections per second for this interface." ::= { panIfEntry 4 } panIfActiveOtherIpCps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Other IP connections per second for this interface." ::= { panIfEntry 5 } --------------------------------------------------------------- -- panZoneTable panZoneEntry OBJECT-TYPE SYNTAX PanZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are created when panZoneCPS are added to the panZoneCPSTable." INDEX { panZoneName, panVsysId } ::= { panZoneTable 1 } PanZoneEntry ::= SEQUENCE { panZoneName DisplayString, panZoneActiveTcpCps Unsigned32, panZoneActiveUdpCps Unsigned32, panZoneActiveOtherIpCps Unsigned32 } panZoneName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Zone name for the interface" ::= { panZoneEntry 1 } panZoneActiveTcpCps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active TCP connections per second for this zone." ::= { panZoneEntry 2 } panZoneActiveUdpCps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active UDP connections per second for this zone." ::= { panZoneEntry 3 } panZoneActiveOtherIpCps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Other IP connections per second for this zone." ::= { panZoneEntry 4 } -------------------------------------------------------------------------------------------------------- END