lxml.etree

lxml.etree tries to follow the ElementTree API wherever it can. There are however some incompatibilities (see compatibility). The extensions are documented here.

If you need to know which version of lxml is installed, you can access the lxml.etree.LXML_VERSION attribute to retrieve a version tuple. Note, however, that it did not exist before version 1.0, so you will get an AttributeError in older versions. The versions of libxml2 and libxslt are available through the attributes LIBXML_VERSION and LIBXSLT_VERSION.

The following examples usually assume this to be executed first:

>>> from lxml import etree

Other Element APIs

While lxml.etree itself uses the ElementTree API, it is possible to replace the Element implementation by custom element subclasses. This has been used to implement well-known XML APIs on top of lxml. For example, lxml ships with a data-binding implementation called objectify, which is similar to the Amara bindery tool.

lxml.etree comes with a number of different lookup schemes to customize the mapping between libxml2 nodes and the Element classes used by lxml.etree.

Trees and Documents

Compared to the original ElementTree API, lxml.etree has an extended tree model. It knows about parents and siblings of elements:

>>> root = etree.Element("root")
>>> a = etree.SubElement(root, "a")
>>> b = etree.SubElement(root, "b")
>>> c = etree.SubElement(root, "c")
>>> d = etree.SubElement(root, "d")
>>> e = etree.SubElement(d,    "e")
>>> b.getparent() == root
True
>>> print(b.getnext().tag)
c
>>> print(c.getprevious().tag)
b

Elements always live within a document context in lxml. This implies that there is also a notion of an absolute document root. You can retrieve an ElementTree for the root node of a document from any of its elements.

>>> tree = d.getroottree()
>>> print(tree.getroot().tag)
root

Note that this is different from wrapping an Element in an ElementTree. You can use ElementTrees to create XML trees with an explicit root node:

>>> tree = etree.ElementTree(d)
>>> print(tree.getroot().tag)
d
>>> etree.tostring(tree)
b'<d><e/></d>'

ElementTree objects are serialised as complete documents, including preceding or trailing processing instructions and comments.

All operations that you run on such an ElementTree (like XPath, XSLT, etc.) will understand the explicitly chosen root as root node of a document. They will not see any elements outside the ElementTree. However, ElementTrees do not modify their Elements:

>>> element = tree.getroot()
>>> print(element.tag)
d
>>> print(element.getparent().tag)
root
>>> print(element.getroottree().getroot().tag)
root

The rule is that all operations that are applied to Elements use either the Element itself as reference point, or the absolute root of the document that contains this Element (e.g. for absolute XPath expressions). All operations on an ElementTree use its explicit root node as reference.

Iteration

The ElementTree API makes Elements iterable to supports iteration over their children. Using the tree defined above, we get:

>>> [ child.tag for child in root ]
['a', 'b', 'c', 'd']

To iterate in the opposite direction, use the reversed() function that exists in Python 2.4 and later.

Tree traversal should use the element.iter() method:

>>> [ el.tag for el in root.iter() ]
['root', 'a', 'b', 'c', 'd', 'e']

lxml.etree also supports this, but additionally features an extended API for iteration over the children, following/preceding siblings, ancestors and descendants of an element, as defined by the respective XPath axis:

>>> [ child.tag for child in root.iterchildren() ]
['a', 'b', 'c', 'd']
>>> [ child.tag for child in root.iterchildren(reversed=True) ]
['d', 'c', 'b', 'a']
>>> [ sibling.tag for sibling in b.itersiblings() ]
['c', 'd']
>>> [ sibling.tag for sibling in c.itersiblings(preceding=True) ]
['b', 'a']
>>> [ ancestor.tag for ancestor in e.iterancestors() ]
['d', 'root']
>>> [ el.tag for el in root.iterdescendants() ]
['a', 'b', 'c', 'd', 'e']

Note how element.iterdescendants() does not include the element itself, as opposed to element.iter(). The latter effectively implements the 'descendant-or-self' axis in XPath.

All of these iterators support an additional tag keyword argument that filters the generated elements by tag name:

>>> [ child.tag for child in root.iterchildren(tag='a') ]
['a']
>>> [ child.tag for child in d.iterchildren(tag='a') ]
[]
>>> [ el.tag for el in root.iterdescendants(tag='d') ]
['d']
>>> [ el.tag for el in root.iter(tag='d') ]
['d']

The most common way to traverse an XML tree is depth-first, which traverses the tree in document order. This is implemented by the .iter() method. While there is no dedicated method for breadth-first traversal, it is almost as simple if you use the collections.deque type from Python 2.4.

>>> root = etree.XML('<root><a><b/><c/></a><d><e/></d></root>')
>>> print(etree.tostring(root, pretty_print=True, encoding=unicode))
<root>
  <a>
    <b/>
    <c/>
  </a>
  <d>
    <e/>
  </d>
</root>

>>> queue = deque([root])
>>> while queue:
...    el = queue.popleft()  # pop next element
...    queue.extend(el)      # append its children
...    print(el.tag)
root
a
d
b
c
e

See also the section on the utility functions iterparse() and iterwalk() in the parser documentation.

Error handling on exceptions

Libxml2 provides error messages for failures, be it during parsing, XPath evaluation or schema validation. The preferred way of accessing them is through the local error_log property of the respective evaluator or transformer object. See their documentation for details.

However, lxml also keeps a global error log of all errors that occurred at the application level. Whenever an exception is raised, you can retrieve the errors that occured and "might have" lead to the problem from the error log copy attached to the exception:

>>> etree.clear_error_log()
>>> broken_xml = '''
... <root>
...   <a>
... </root>
... '''
>>> try:
...   etree.parse(StringIO(broken_xml))
... except etree.XMLSyntaxError, e:
...   pass # just put the exception into e

Once you have caught this exception, you can access its error_log property to retrieve the log entries or filter them by a specific type, error domain or error level:

>>> log = e.error_log.filter_from_level(etree.ErrorLevels.FATAL)
>>> print(log)
<string>:4:8:FATAL:PARSER:ERR_TAG_NAME_MISMATCH: Opening and ending tag mismatch: a line 3 and root
<string>:5:1:FATAL:PARSER:ERR_TAG_NOT_FINISHED: Premature end of data in tag root line 2

This might look a little cryptic at first, but it is the information that libxml2 gives you. At least the message at the end should give you a hint what went wrong and you can see that the fatal errors (FATAL) happened during parsing (PARSER) lines 4, column 8 and line 5, column 1 of a string (<string>, or the filename if available). Here, PARSER is the so-called error domain, see lxml.etree.ErrorDomains for that. You can get it from a log entry like this:

>>> entry = log[0]
>>> print(entry.domain_name)
PARSER
>>> print(entry.type_name)
ERR_TAG_NAME_MISMATCH
>>> print(entry.filename)
<string>

There is also a convenience attribute last_error that returns the last error or fatal error that occurred:

>>> entry = e.error_log.last_error
>>> print(entry.domain_name)
PARSER
>>> print(entry.type_name)
ERR_TAG_NOT_FINISHED
>>> print(entry.filename)
<string>

Error logging

lxml.etree supports logging libxml2 messages to the Python stdlib logging module. This is done through the etree.PyErrorLog class. It disables the error reporting from exceptions and forwards log messages to a Python logger. To use it, see the descriptions of the function etree.useGlobalPythonLog and the class etree.PyErrorLog for help. Note that this does not affect the local error logs of XSLT, XMLSchema, etc.

Serialisation

lxml.etree has direct support for pretty printing XML output. Functions like ElementTree.write() and tostring() support it through a keyword argument:

>>> root = etree.XML("<root><test/></root>")
>>> etree.tostring(root)
b'<root><test/></root>'

>>> print(etree.tostring(root, pretty_print=True))
<root>
  <test/>
</root>

Note the newline that is appended at the end when pretty printing the output. It was added in lxml 2.0.

By default, lxml (just as ElementTree) outputs the XML declaration only if it is required by the standard:

>>> unicode_root = etree.Element( u"t\u3120st" )
>>> unicode_root.text = u"t\u0A0Ast"
>>> etree.tostring(unicode_root, encoding="utf-8")
b'<t\xe3\x84\xa0st>t\xe0\xa8\x8ast</t\xe3\x84\xa0st>'

>>> print(etree.tostring(unicode_root, encoding="iso-8859-1"))
<?xml version='1.0' encoding='iso-8859-1'?>
<t&#12576;st>t&#2570;st</t&#12576;st>

Also see the general remarks on Unicode support.

You can enable or disable the declaration explicitly by passing another keyword argument for the serialisation:

>>> print(etree.tostring(root, xml_declaration=True))
<?xml version='1.0' encoding='ASCII'?>
<root><test/></root>

>>> unicode_root.clear()
>>> etree.tostring(unicode_root, encoding="UTF-16LE",
...                              xml_declaration=False)
b'<\x00t\x00 1s\x00t\x00/\x00>\x00'

Note that a standard compliant XML parser will not consider the last line well-formed XML if the encoding is not explicitly provided somehow, e.g. in an underlying transport protocol:

>>> notxml = etree.tostring(unicode_root, encoding="UTF-16LE",
...                                       xml_declaration=False)
>>> root = etree.XML(notxml)        #doctest: +ELLIPSIS
Traceback (most recent call last):
  ...
lxml.etree.XMLSyntaxError: ...

CDATA

By default, lxml's parser will strip CDATA sections from the tree and replace them by their plain text content. As real applications for CDATA are rare, this is the best way to deal with this issue.

However, in some cases, keeping CDATA sections or creating them in a document is required to adhere to existing XML language definitions. For these special cases, you can instruct the parser to leave CDATA sections in the document:

>>> parser = etree.XMLParser(strip_cdata=False)
>>> root = etree.XML('<root><![CDATA[test]]></root>', parser)
>>> root.text
'test'

>>> etree.tostring(root)
b'<root><![CDATA[test]]></root>'

Note how the .text property does not give any indication that the text content is wrapped by a CDATA section. If you want to make sure your data is wrapped by a CDATA block, you can use the CDATA() text wrapper:

>>> root.text = 'test'

>>> root.text
'test'
>>> etree.tostring(root)
b'<root>test</root>'

>>> root.text = etree.CDATA(root.text)

>>> root.text
'test'
>>> etree.tostring(root)
b'<root><![CDATA[test]]></root>'

XInclude and ElementInclude

You can let lxml process xinclude statements in a document by calling the xinclude() method on a tree:

>>> data = StringIO('''\
... <doc xmlns:xi="http://www.w3.org/2001/XInclude">
... <foo/>
... <xi:include href="doc/test.xml" />
... </doc>''')

>>> tree = etree.parse(data)
>>> tree.xinclude()
>>> print(etree.tostring(tree.getroot()))
<doc xmlns:xi="http://www.w3.org/2001/XInclude">
<foo/>
<a xml:base="doc/test.xml"/>
</doc>

Note that the ElementTree compatible ElementInclude module is also supported as lxml.ElementInclude. It has the additional advantage of supporting custom URL resolvers at the Python level. The normal XInclude mechanism cannot deploy these. If you need ElementTree compatibility or custom resolvers, you have to stick to the external Python module.

write_c14n on ElementTree

The lxml.etree.ElementTree class has a method write_c14n, which takes a file object as argument. This file object will receive an UTF-8 representation of the canonicalized form of the XML, following the W3C C14N recommendation. For example:

>>> f = StringIO('<a><b/></a>')
>>> tree = etree.parse(f)
>>> f2 = StringIO()
>>> tree.write_c14n(f2)
>>> print(f2.getvalue().decode("utf-8"))
<a><b></b></a>